component
HY2112-AB
Public Unreviewedby Ray
HYCON Tech Battery Management, SOT-23-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗README
markdownHY2112-AB
HYCON Tech · Battery Management · SOT-23-6
HY2112-AB from HYCON Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OD | output | Discharge control MOSFET gate drive output. Drives the gate of the external discharge-control N-MOSFET; V_OH ≈ VDD-0.02V, V_OL ≈ 0.1V. Pulled low to disable discharging under overdischarge, discharge overcurrent, or load short-circuit conditions. |
| 2 | CS | input | Overcurrent detection input and charger detection terminal. Senses the voltage across the series MOSFET stack for discharge/charge overcurrent (V_DIP=+100mV, V_CIP=-200mV for -AB) and load short-circuit (V_SIP=0.85V) detection. High-voltage tolerant (rated VDD-20 to VDD+0.3V, abs-max ~20V) to allow charger connection. |
| 3 | OC | output | Charge control MOSFET gate drive output. Drives the gate of the external charge-control N-MOSFET; V_OH ≈ VDD-0.02V, V_OL ≈ 0.1V. Pulled low to disable charging under overcharge or charge overcurrent conditions. Uses a level-shifter to tolerate charger-side high voltages (abs-max VDD-20 to VDD+0.3V). |
| 4 | NC | unconnected | No internal connection. Leave floating or tie to VSS at the board designer's discretion. |
| 5 | VDD | power_in | Positive supply input; connects to the battery positive terminal through a decoupling resistor. Operating range VDD-VSS = 1.5V to 8V (abs-max 10V). Typical operating current 3.0 µA at VDD=3.2V (max 6.0 µA); sleep-mode current 0.1 µA max. |
| 6 | VSS | power_in | Ground / negative supply input; connects to the battery negative terminal (reference for all internal detection thresholds). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HYCON Tech |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
HY2112-ABHY2112-ABBBHY2112-ABCBHY2112-ABEBHY2112-ABGBHY2112-ABHB
CAD (KiCad official)
- Symbol:
HY2112-AB - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HYCON Tech datasheet (17 pp, sha256
003247d01174fb89, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).