Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗
Contents

README

markdown

HGX3485EIMM

HGSEMI · RS-485/RS-422 ICs · MSOP-8

HGX3485EIMM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output. When /RE is low and A-B >= +200 mV, RO drives high; when A-B <= -200 mV, RO drives low. High-impedance when /RE is high.
2 /RE input Receiver output enable, active-low. /RE low enables the receiver (RO active); /RE high puts RO into high-impedance. With /RE high AND DE low the device enters low-power shutdown mode.
3 DE input Driver output enable, active-high. DE high enables the differential driver on A/B; DE low places A and B in high-impedance. With /RE high AND DE low the device enters low-power shutdown mode.
4 DI input Driver data input. When DE is high, DI low drives A low and B high; DI high drives A high and B low. Ignored when the driver is disabled.
5 GND power_in Ground reference for all supply and signal pins.
6 A bidirectional RS-485/RS-422 non-inverting bus pin: driver non-inverting output and receiver non-inverting input. Tolerates -7 V to +13 V common-mode; input impedance >= 12 kOhm (1/8 unit load).
7 B bidirectional RS-485/RS-422 inverting bus pin: driver inverting output and receiver inverting input. Tolerates -7 V to +13 V common-mode; input impedance >= 12 kOhm (1/8 unit load).
8 VCC power_in Supply voltage input, 3.0 V to 3.6 V (nominal 3.3 V). Absolute maximum +7 V. Decouple locally to GND.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package MSOP-8
Category Comm/UART
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • HGX3485EIMM/TR
  • HGX3485EIMMECMM/TR
  • HGX3485EIMMEIN
  • HGX3485EIMMECN
  • HGX3485EIMMEIM/TR
  • HGX3485EIMMECM/TR
  • HGX3485EIMMEIDQ/TR
  • HGX3485EIMMEIDQ3/TR
  • HGX3485EIMMECDQ/TR
  • HGX3485EIMMECDQ3/TR
  • HGX3485EIMMEIM8/TR
  • HGX3485EIMMECM8/TR

CAD (KiCad official)

  • Symbol: HGX3485EIMM
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (17 pp, sha256 6236ed989891b63a, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF