component
hgv6042m
Public Unreviewedby Ray
HGSEMI Operational Amplifier, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
README
markdownHGV6042M
HGSEMI · Operational Amplifier · SOP-8
HGV6042M from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Amplifier A output. Rail-to-rail push-pull output; typically swings to within ~50 mV of either supply rail into light resistive loads (>50 kΩ), with typical source/sink current of 20 mA into a 10 Ω load to VS/2. |
| 2 | INA- | input | Amplifier A inverting input. High-impedance CMOS input with ~1 pA typical bias current; usable common-mode range extends from VSS-0.1 V to VDD+0.1 V. |
| 3 | INA+ | input | Amplifier A non-inverting input. High-impedance CMOS input with ~1 pA typical bias current; rail-to-rail common-mode range (VSS-0.1 V to VDD+0.1 V). |
| 4 | VSS | power_in | Negative supply / ground. In single-supply operation tie to GND; in dual-supply operation this is the negative rail (as low as -2.75 V, with VDD-VSS ≤ 5.5 V operating, 7.5 V absolute maximum). Bypass to ground with a 0.1 µF ceramic capacitor when used as a negative rail. |
| 5 | INB+ | input | Amplifier B non-inverting input. High-impedance CMOS input with ~1 pA typical bias current; rail-to-rail common-mode range (VSS-0.1 V to VDD+0.1 V). |
| 6 | INB- | input | Amplifier B inverting input. High-impedance CMOS input with ~1 pA typical bias current; usable common-mode range extends from VSS-0.1 V to VDD+0.1 V. |
| 7 | OUTB | output | Amplifier B output. Rail-to-rail push-pull output; typically swings to within ~50 mV of either supply rail into light resistive loads (>50 kΩ), with typical source/sink current of 20 mA into a 10 Ω load to VS/2. |
| 8 | VDD | power_in | Positive supply. Operating range 1.4 V to 5.5 V (VDD-VSS), absolute maximum 7.5 V. Place a 0.1 µF ceramic bypass capacitor close to this pin for best performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
HGV6042M/TRHGV6042MM/TR
CAD (KiCad official)
- Symbol:
HGV6042M - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (None pp, sha256
02d60896f00f702f, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).