FT60F011A-RB from FMD Fremont Micro Devices, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VDD	power_in	Positive supply. Operating range 2.0-5.5 V at Fsys ≤ 8 MHz, 2.7-5.5 V at Fsys ≤ 16 MHz.
2	PA2/T0CKI/INT	bidirectional	PA2 general-purpose I/O with programmable pull-up and port-change interrupt (Schmitt-trigger input, CMOS output). Alternate functions: T0CKI - Timer0 external clock input (Fmax = 4 MHz); INT - external interrupt input.
3	PA1/ICSPDAT	bidirectional	PA1 general-purpose I/O with programmable pull-up and port-change interrupt (Schmitt-trigger input, CMOS output). Alternate function: ICSPDAT - in-circuit serial programming / debug data (Fmax = 6 MHz).
4	PA3/MCLRB	input	PA3 input with port-change interrupt (Schmitt-trigger input, input-only, no internal pull-up in GPIO mode). Alternate function: MCLRB - external active-low reset input (automatic internal pull-up enabled when configured as MCLRB).
5	PA0/ICSPCLK	bidirectional	PA0 general-purpose I/O with programmable pull-up and port-change interrupt (Schmitt-trigger input, CMOS output). Alternate function: ICSPCLK - in-circuit serial programming / debug clock (Fmax = 6 MHz).
6	PA5	bidirectional	PA5 general-purpose I/O with programmable pull-up and port-change interrupt (Schmitt-trigger input, CMOS output).
7	PA4/CLKO	bidirectional	PA4 general-purpose I/O with programmable pull-up and port-change interrupt (Schmitt-trigger input, CMOS output). Alternate function: CLKO - test/system clock output.
8	VSS	power_in	Ground reference (0 V).

Key specifications

Parameter	Value
Manufacturer	FMD Fremont Micro Devices
Package	SOP-8
Category	MCU
Pins	8

Ordering variants

Same part, different packaging or reel option.

FT60F011A-RB
FT60F010A-URB

CAD (KiCad official)

Symbol: FT60F011A-RB
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOP-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`ft60f011a-rb.step`	122 KB	You want the bare part, or you mark your own boards.
`ft60f011a-rb-etched.step`	2.2 MB	You want the part with `FT60F011A-RB` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 552 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: FMD Fremont Micro Devices datasheet (62 pp, sha256 80768a5eebf0251f, retrieved 2026-08-17, tier: lcsc)
Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF