component
FT232RL
Public Unreviewedby adom
FTDI USB-to-UART bridge, SSOP-28. USB 2.0 full-speed, 300 baud-3 Mbaud, integrated clock + EEPROM. Datasheet-verified.
← Commit history
Publish 0.1.0
8 files changed
+1119−9
README.md+69−2@@ -1,5 +1,72 @@ # FT232RL -USB to UART IC, SSOP-28+**FTDI** · USB-to-UART bridge · SSOP-28 -The FT232RL is a USB to asynchronous serial data transfer IC from FTDI. Features integrated EEPROM, clock generator, and USB resistors. The gold standard for reliable USB-serial communication.+USB-to-serial UART interface IC in an SSOP-28 package, with integrated clock generation, EEPROM, USB termination, and configurable CBUS I/O, so it needs no external crystal or EEPROM. It bridges a host USB 2.0 full-speed port to a TTL UART at 300 baud to 3 Mbaud, with 128-byte RX and 256-byte TX FIFOs and bus- or self-powered operation. An on-chip 3.3 V level converter drives the UART I/O at 1.8-5 V. The classic no-fuss programmer/console adapter.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | TXD | output | Transmit Asynchronous Data Output (UART TXD). |+| 2 | DTR# | output | Data Terminal Ready control output / handshake signal (active low). |+| 3 | RTS# | output | Request To Send control output / handshake signal (active low). |+| 4 | VCCIO | power_in | +1.8V to +5.25V supply for the UART interface and CBUS group pins. Connect to 3V3OUT for +3.3V CMOS drive, to VCC for +5V CMOS drive, or to an external +1.8V–+2.8V rail for lower-level drive. |+| 5 | RXD | input | Receiving Asynchronous Data Input (UART RXD). |+| 6 | RI# | input | Ring Indicator control input (active low). When remote wake-up is enabled in the EEPROM, a 20 ms active-low pulse can resume the PC USB host from suspend. |+| 7 | GND | power_in | Device digital ground supply pin. |+| 8 | NC | unconnected | No internal connection. Leave unconnected. |+| 9 | DSR# | input | Data Set Ready control input / handshake signal (active low). |+| 10 | DCD# | input | Data Carrier Detect control input (active low). |+| 11 | CTS# | input | Clear To Send control input / handshake signal (active low). |+| 12 | CBUS4 | bidirectional | Configurable CBUS output-only pin. Function is set in the internal EEPROM. Factory default is SLEEP#. See CBUS Signal Options (Table 3.9). |+| 13 | CBUS2 | bidirectional | Configurable CBUS I/O pin. Function set in internal EEPROM. Factory default is TXDEN. See CBUS Signal Options (Table 3.9). |+| 14 | CBUS3 | bidirectional | Configurable CBUS I/O pin. Function set in internal EEPROM. Factory default is PWREN# (use with a 10kΩ pull-up resistor). See CBUS Signal Options (Table 3.9). |+| 15 | USBDP | bidirectional | USB Data Signal Plus (D+). Incorporates internal series resistor and 1.5kΩ pull-up resistor to +3.3V (from 3V3OUT). |+| 16 | USBDM | bidirectional | USB Data Signal Minus (D-). Incorporates internal series resistor. |+| 17 | 3V3OUT | power_out | +3.3V output from the integrated LDO regulator. Decouple with a 100 nF capacitor to ground. Supplies the internal USB transceiver and 1.5kΩ pull-up on USBDP. Up to 50 mA available to power external logic or supply VCCIO. |+| 18 | GND | power_in | Device digital ground supply pin. |+| 19 | RESET# | input | Active-low reset input. Can be driven by an external device to reset the FT232R. If not required, leave unconnected or pull up to VCC. |+| 20 | VCC | power_in | +3.3V to +5.25V supply to the device core. Minimum +4.0V (or VBUS=+5V) when using the internal clock; operation at +3.3V requires an external crystal oscillator. |+| 21 | GND | power_in | Device digital ground supply pin. |+| 22 | CBUS1 | bidirectional | Configurable CBUS I/O pin. Function set in internal EEPROM. Factory default is RXLED#. See CBUS Signal Options (Table 3.9). |+| 23 | CBUS0 | bidirectional | Configurable CBUS I/O pin. Function set in internal EEPROM. Factory default is TXLED#. See CBUS Signal Options (Table 3.9). |+| 24 | NC | unconnected | No internal connection. Leave unconnected. |+| 25 | AGND | power_in | Analog ground supply for the internal clock multiplier. |+| 26 | TEST | input | Puts the device into IC test mode. Must be tied to GND for normal operation, otherwise the device will appear to fail. |+| 27 | OSCI | input | Input for the 12 MHz oscillator cell. Optional — can be left unconnected when using the internal oscillator. |+| 28 | OSCO | output | Output from the 12 MHz oscillator cell. Optional — can be left unconnected when using the internal oscillator. |++## Key specifications++| Parameter | Value |+|---|---|+| Type | USB 2.0 full-speed to UART bridge |+| Data rate | 300 baud to 3 Mbaud |+| Integrated | Clock generation, EEPROM, USB termination |+| CBUS I/O | 5 configurable pins |+| FIFO | 128 B RX / 256 B TX |+| I/O drive | 1.8-5 V CMOS (on-chip 3.3 V converter) |+| Power | Bus- or self-powered |+| Package | SSOP-28 |+| Body (L×W×H) | 10.2 × 5.3 × 1.75 mm |++## Ordering variants++- `FT232RL-REEL (SSOP-28, tape & reel)`++## CAD (KiCad official)++- Symbol: `Interface_USB:FT232RL`+- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`+- 3D model: SSOP-28 (KiCad packages3D)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [FTDI datasheet](https://cdn.sparkfun.com/datasheets/BreakoutBoards/DS_FT232R.pdf) (43 pp, sha256 `0f4e94f51a392d25`, retrieved 2026-08-17, tier: cse)+- **Extractor:** `ds2sf` (Claude) — every pin and dimension is cited to a datasheet page; refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ft232rl-datasheet.pdf)
docs/ft232rl-datasheet.pdfadded⋯ 1 unchanged line ⋯
docs/hero.pngadded⋯ 1 unchanged line ⋯
ft232rl.glbadded⋯ 1 unchanged line ⋯
ft232rl.kicad_modadded+420@@ -0,0 +1,420 @@+(footprint "SSOP-28_5.3x10.2mm_P0.65mm"+ (version 20260206)+ (generator "kicad-footprint-generator")+ (layer "F.Cu")+ (descr "SSOP, 28 Pin (JEDEC MO-150 variation AH, 1.75mm body thickness, https://www.jedec.org/document_search?search_api_views_fulltext=MO-150, https://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=400)")+ (tags "SSOP SO")+ (property "Reference" "REF**"+ (at 0 -6.05 0)+ (layer "F.SilkS")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "SSOP-28_5.3x10.2mm_P0.65mm"+ (at 0 6.05 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "KiLib_Generator" "package/gullwing"+ (at 0 0 0)+ (layer "F.SilkS")+ (hide yes)+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -2.76 -5.21)+ (end 2.76 -5.21)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -2.76 -4.685)+ (end -2.76 -5.21)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -2.76 5.21)+ (end -2.76 4.685)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 2.76 -5.21)+ (end 2.76 -4.685)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 2.76 4.685)+ (end 2.76 5.21)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 2.76 5.21)+ (end -2.76 5.21)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_poly+ (pts+ (xy -3.5 -4.69)+ (xy -3.84 -5.16)+ (xy -3.16 -5.16)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ )+ (fp_line+ (start -4.7 -4.68)+ (end -2.9 -4.68)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -4.7 4.68)+ (end -4.7 -4.68)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -2.9 -5.35)+ (end 2.9 -5.35)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -2.9 -4.68)+ (end -2.9 -5.35)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -2.9 4.68)+ (end -4.7 4.68)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -2.9 5.35)+ (end -2.9 4.68)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 2.9 -5.35)+ (end 2.9 -4.68)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 2.9 -4.68)+ (end 4.7 -4.68)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 2.9 4.68)+ (end 2.9 5.35)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 2.9 5.35)+ (end -2.9 5.35)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 4.7 -4.68)+ (end 4.7 4.68)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 4.7 4.68)+ (end 2.9 4.68)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_poly+ (pts+ (xy -1.65 -5.1)+ (xy 2.65 -5.1)+ (xy 2.65 5.1)+ (xy -2.65 5.1)+ (xy -2.65 -4.1)+ )+ (stroke+ (width 0.1)+ (type solid)+ )+ (fill no)+ (layer "F.Fab")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (pad "1" smd roundrect+ (at -3.5 -4.225)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "2" smd roundrect+ (at -3.5 -3.575)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "3" smd roundrect+ (at -3.5 -2.925)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "4" smd roundrect+ (at -3.5 -2.275)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "5" smd roundrect+ (at -3.5 -1.625)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "6" smd roundrect+ (at -3.5 -0.975)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "7" smd roundrect+ (at -3.5 -0.325)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "8" smd roundrect+ (at -3.5 0.325)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "9" smd roundrect+ (at -3.5 0.975)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "10" smd roundrect+ (at -3.5 1.625)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "11" smd roundrect+ (at -3.5 2.275)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "12" smd roundrect+ (at -3.5 2.925)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "13" smd roundrect+ (at -3.5 3.575)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "14" smd roundrect+ (at -3.5 4.225)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "15" smd roundrect+ (at 3.5 4.225)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "16" smd roundrect+ (at 3.5 3.575)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "17" smd roundrect+ (at 3.5 2.925)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "18" smd roundrect+ (at 3.5 2.275)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "19" smd roundrect+ (at 3.5 1.625)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "20" smd roundrect+ (at 3.5 0.975)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "21" smd roundrect+ (at 3.5 0.325)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "22" smd roundrect+ (at 3.5 -0.325)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "23" smd roundrect+ (at 3.5 -0.975)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "24" smd roundrect+ (at 3.5 -1.625)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "25" smd roundrect+ (at 3.5 -2.275)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "26" smd roundrect+ (at 3.5 -2.925)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "27" smd roundrect+ (at 3.5 -3.575)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "28" smd roundrect+ (at 3.5 -4.225)+ (size 1.9 0.4)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/SSOP-28_5.3x10.2mm_P0.65mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
ft232rl.kicad_symadded+573@@ -0,0 +1,573 @@+(kicad_symbol_lib+ (version 20251024)+ (generator "kicad_symbol_editor")+ (generator_version "10.0")+(symbol "FT232RL"+ (exclude_from_sim no)+ (in_bom yes)+ (on_board yes)+ (in_pos_files yes)+ (duplicate_pin_numbers_are_jumpers no)+ (property "Reference" "U"+ (at -16.51 22.86 0)+ (show_name no)+ (do_not_autoplace no)+ (effects+ (font+ (size 1.27 1.27)+ )+ (justify left)+ )+ )+ (property "Value" "FT232RL"+ (at 10.16 22.86 0)+ (show_name no)+ (do_not_autoplace no)+ (effects+ (font+ (size 1.27 1.27)+ )+ (justify left)+ )+ )+ (property "Footprint" "Package_SO:SSOP-28_5.3x10.2mm_P0.65mm"+ (at 27.94 -22.86 0)+ (show_name no)+ (do_not_autoplace no)+ (hide yes)+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (property "Datasheet" "https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT232R.pdf"+ (at 0 0 0)+ (show_name no)+ (do_not_autoplace no)+ (hide yes)+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (property "Description" "USB to Serial Interface, SSOP-28"+ (at 0 0 0)+ (show_name no)+ (do_not_autoplace no)+ (hide yes)+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (property "ki_keywords" "FTDI USB Serial"+ (at 0 0 0)+ (show_name no)+ (do_not_autoplace no)+ (hide yes)+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (property "ki_fp_filters" "SSOP*5.3x10.2mm*P0.65mm*"+ (at 0 0 0)+ (show_name no)+ (do_not_autoplace no)+ (hide yes)+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (symbol "FT232RL_0_1"+ (rectangle+ (start -16.51 21.59)+ (end 16.51 -21.59)+ (stroke+ (width 0.254)+ (type default)+ )+ (fill+ (type background)+ )+ )+ )+ (symbol "FT232RL_1_1"+ (pin output line+ (at 20.32 17.78 180)+ (length 3.81)+ (name "TXD"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "1"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin output output_low+ (at 20.32 7.62 180)+ (length 3.81)+ (name "DTR"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "2"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin output output_low+ (at 20.32 12.7 180)+ (length 3.81)+ (name "RTS"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "3"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin power_in line+ (at -2.54 25.4 270)+ (length 3.81)+ (name "VCCIO"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "4"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin input line+ (at 20.32 15.24 180)+ (length 3.81)+ (name "RXD"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "5"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin input input_low+ (at 20.32 0 180)+ (length 3.81)+ (name "RI"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "6"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin power_in line+ (at 0 -25.4 90)+ (length 3.81)+ (name "GND"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "7"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin input input_low+ (at 20.32 5.08 180)+ (length 3.81)+ (name "DCR"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "9"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin input input_low+ (at 20.32 2.54 180)+ (length 3.81)+ (name "DCD"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "10"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin input input_low+ (at 20.32 10.16 180)+ (length 3.81)+ (name "CTS"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "11"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin bidirectional line+ (at 20.32 -17.78 180)+ (length 3.81)+ (name "CBUS4"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "12"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin bidirectional line+ (at 20.32 -12.7 180)+ (length 3.81)+ (name "CBUS2"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "13"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin bidirectional line+ (at 20.32 -15.24 180)+ (length 3.81)+ (name "CBUS3"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "14"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin bidirectional line+ (at -20.32 10.16 0)+ (length 3.81)+ (name "USBD+"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "15"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin bidirectional line+ (at -20.32 7.62 0)+ (length 3.81)+ (name "USBD-"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "16"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin power_out line+ (at -20.32 17.78 0)+ (length 3.81)+ (name "3V3OUT"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "17"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin power_in line+ (at 2.54 -25.4 90)+ (length 3.81)+ (name "GND"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "18"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin input line+ (at -20.32 0 0)+ (length 3.81)+ (name "~{RESET}"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "19"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin power_in line+ (at 2.54 25.4 270)+ (length 3.81)+ (name "VCC"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "20"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin power_in line+ (at 5.08 -25.4 90)+ (length 3.81)+ (name "GND"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "21"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin bidirectional line+ (at 20.32 -10.16 180)+ (length 3.81)+ (name "CBUS1"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "22"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin bidirectional line+ (at 20.32 -7.62 180)+ (length 3.81)+ (name "CBUS0"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "23"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin power_in line+ (at -5.08 -25.4 90)+ (length 3.81)+ (name "AGND"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "25"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin input line+ (at -20.32 -17.78 0)+ (length 3.81)+ (name "TEST"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "26"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin input line+ (at -20.32 -5.08 0)+ (length 3.81)+ (name "OSCI"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "27"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ (pin output line+ (at -20.32 -10.16 0)+ (length 3.81)+ (name "OSCO"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ (number "28"+ (effects+ (font+ (size 1.27 1.27)+ )+ )+ )+ )+ )+ (embedded_fonts no)+ )+)
package.jsonadded+30@@ -0,0 +1,30 @@+{+ "slug": "ft232rl",+ "version": "0.1.0",+ "type": "component",+ "description": "FTDI USB-to-UART bridge, SSOP-28. USB 2.0 full-speed, 300 baud-3 Mbaud, integrated clock + EEPROM. Datasheet-verified.",+ "tags": [+ "component",+ "interface",+ "usb",+ "uart",+ "ssop-28",+ "ftdi"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ft232rl.kicad_sym",+ "ft232rl.kicad_mod",+ "ft232rl.glb",+ "docs/hero.png",+ "docs/ft232rl-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ]+}
page.json+27−7@@ -4,8 +4,15 @@ "slug": "ft232rl", "title": "FT232RL", "brief": "USB to UART IC, SSOP-28",- "version": "1.0.0",- "tags": [],+ "version": "0.1.0",+ "tags": [+ "component",+ "interface",+ "usb",+ "uart",+ "ssop-28",+ "ftdi"+ ], "license": "MIT", "component": { "mpn": "FT232RL",@@ -20,18 +27,31 @@ }, "readme": "# FT232RL\n\nUSB to UART IC, SSOP-28\n\nThe FT232RL is a USB to asynchronous serial data transfer IC from FTDI. Features integrated EEPROM, clock generator, and USB resistors. The gold standard for reliable USB-serial communication.", "author": {- "id": "695820315b5f1e4db2fcf602", "name": "Kyle Bergstedt", "email": "[email protected]" },- "visibility": {- "public": true+ "visibility": "public",+ "hero": {+ "type": "image",+ "path": "docs/hero.png" },- "hero": null, "sample_prompts": [], "discovery_triggers": [], "discovery_pitch": null, "metadata": {}, "created_at": "2026-05-28T05:33:31.684Z",- "updated_at": "2026-05-28T05:33:31.684Z"+ "updated_at": "2026-05-28T05:33:31.684Z",+ "description": "FTDI USB-to-UART bridge, SSOP-28. USB 2.0 full-speed, 300 baud-3 Mbaud, integrated clock + EEPROM. Datasheet-verified.",+ "dependencies": {},+ "files": [+ "page.json",+ "README.md",+ "ft232rl.kicad_sym",+ "ft232rl.kicad_mod",+ "ft232rl.glb",+ "docs/hero.png",+ "docs/ft232rl-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ] }