component
ES2631
Public Unreviewedby Ray
Innosen Buffer/Driver/Transceiver, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.
README
markdownES2631
Innosen · Buffer/Driver/Transceiver · SOP-16
ES2631 from Innosen, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1A | input | RS422 driver 1 data input (TTL). |
| 2 | 1Y | output | Driver 1 non-inverting (in-phase) differential output. |
| 3 | 1Z | output | Driver 1 inverting (out-of-phase) differential output. |
| 4 | G | input | Driver enable, active high. Together with GN controls whether all four drivers are enabled or held in high-impedance state. |
| 5 | 2Z | output | Driver 2 inverting (out-of-phase) differential output. |
| 6 | 2Y | output | Driver 2 non-inverting (in-phase) differential output. |
| 7 | 2A | input | RS422 driver 2 data input (TTL). |
| 8 | GND | power_in | Device ground reference. |
| 9 | 3A | input | RS422 driver 3 data input (TTL). |
| 10 | 3Y | output | Driver 3 non-inverting (in-phase) differential output. |
| 11 | 3Z | output | Driver 3 inverting (out-of-phase) differential output. |
| 12 | GN | input | Driver enable, active low. Together with G controls whether all four drivers are enabled or held in high-impedance state. |
| 13 | 4Z | output | Driver 4 inverting (out-of-phase) differential output. |
| 14 | 4Y | output | Driver 4 non-inverting (in-phase) differential output. |
| 15 | 4A | input | RS422 driver 4 data input (TTL). |
| 16 | VCC | power_in | Supply pin. Recommended VCC = 4.5V to 5.5V (typ 5V). Bypass with 0.1μF near the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Innosen |
| Package | SOP-16 |
| Category | Logic ICs |
| Pins | 16 |
Ordering variants
Same part, different packaging or reel option.
ES2631
CAD (KiCad official)
- Symbol:
ES2631 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Innosen datasheet (7 pp, sha256
e0a0454a32a630a5, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).