EG2131 from EG Micro, in a SOP-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VCC	power_in	Low-side supply input, 11V-20V operating range. Bypass with a 0.1uF high-frequency capacitor close to the pin to attenuate supply noise.
2	HIN	input	High-side logic input, active-high. '1' turns the high-side power MOSFET on, '0' turns it off. Internal 200k pull-down to GND ensures the high-side output stays off when the pin floats.
3	LIN	input	Low-side logic input, active-low (inverted). '0' turns the low-side power MOSFET on, '1' turns it off. Internal 200k pull-up to +5V holds the low-side output off when the pin floats.
4	GND	power_in	Device ground reference for VCC and the low-side driver return.
5	LO	output	Low-side gate drive output. Drives the gate of the low-side power MOSFET/IGBT referenced to GND with ±1A/1.5A source/sink capability.
6	VS	power_in	High-side floating return / switch-node reference. Connects to the source of the high-side MOSFET (or emitter of the IGBT) and is the negative rail for the bootstrap capacitor.
7	HO	output	High-side gate drive output. Drives the gate of the high-side power MOSFET/IGBT referenced to VS with ±1A/1.5A source/sink capability. Can swing up to 300V above GND.
8	VB	power_in	High-side floating bootstrap supply. Connect a bootstrap capacitor from VB to VS and a bootstrap diode from VCC to VB. Rated for up to ~300V above GND.

Key specifications

Parameter	Value
Manufacturer	EG Micro
Package	SOP-8-150mil
Category	PMIC
Pins	8

CAD (KiCad official)

Symbol: EG2131
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOP-8-150mil (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`eg2131.step`	122 KB	You want the bare part, or you mark your own boards.
`eg2131-etched.step`	1.4 MB	You want the part with `EG2131` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 361 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: EG Micro datasheet (12 pp, sha256 392f5e32b0517c92, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF