EA8212T6R from Everanalog IC design, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	BOOT	passive	Bootstrap supply pin for the internal high-side N-MOSFET gate driver. Connect a 33nF ceramic capacitor between BOOT and SWITCH to provide the gate-drive voltage above VSWITCH. Absolute max: VSWITCH-0.3V to VSWITCH+6.3V.
2	GND	power_in	Device ground reference. Return path for both the input capacitors and the internal low-side MOSFET; must be tied to the PCB ground plane with a low-impedance connection.
3	FBK	input	Feedback input to the internal error amplifier, regulated to VREF = 0.6V (typ). Connect a resistor divider from VOUT to FBK to GND to program the output voltage: VOUT = 0.6V x (1 + R1/R2). Absolute max: -0.3V to +6.3V.
4	RUN	input	Enable/shutdown control input. Drive above VRUN-H = 2V to enable the converter, below VRUN-L = 0.4V to place the device in shutdown (ISD < 1uA). Can be tied to PWR through a 150KOhm pull-up for automatic startup. Absolute max: -0.3V to +21V.
5	PWR	power_in	Main power input, 4.5V to 18V (absolute max 21V). Supplies the internal high-side MOSFET and internal regulator. Recommended to decouple with two 10uF X5R/X7R MLCC capacitors to GND placed close to the pin.
6	SWITCH	output	Switching node between the internal high-side and low-side MOSFETs. Connects to the external inductor and bootstrap capacitor to form the buck LC filter output. Absolute max: -1V to +23V; delivers up to 2A continuous.

Key specifications

Parameter	Value
Manufacturer	Everanalog IC design
Package	SOT-23-6
Category	PMIC
Pins	6

Ordering variants

Same part, different packaging or reel option.

EA8212T6R

CAD (KiCad official)

Symbol: EA8212T6R
Footprint: Package_TO_SOT_SMD:SOT-23-6
3D model: SOT-23-6 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`ea8212t6r.step`	97 KB	You want the bare part, or you mark your own boards.
`ea8212t6r-etched.step`	1.8 MB	You want the part with `EA8212T6R` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 453 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Everanalog IC design datasheet (10 pp, sha256 087ea1ebff6656b1, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF