EA8212HT6R from Everanalog IC design, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	BOOT	power_in	Bootstrap supply for the internal high-side N-MOSFET gate driver. Connect a 33nF ceramic capacitor from BOOT to SWITCH to develop the boosted gate-drive rail (VSWITCH-0.3V to VSWITCH+5.0V absolute max).
2	GND	power_in	Device ground reference and return for the low-side power MOSFET. Tie to the system power ground plane.
3	FBK	input	Feedback input to the internal error amplifier (VREF = 0.6V typ). Set output voltage with an external resistor divider between VOUT, FBK and GND: VOUT = 0.6 * (1 + R1/R2). Absolute maximum -0.3V to +6.3V.
4	RUN	input	Enable / on-off control input. Drive above 1.8V (VRUN-H) to enable the converter, below 0.4V (VRUN-L) for shutdown (ISD ~1uA). Can be tied to PWR through a 100k pull-up for automatic startup. Absolute max -0.3V to +20V.
5	PWR	power_in	Main power input (4.5V to 18V operating, 20V absolute max). Decouple with two 10uF X5R/X7R MLCC capacitors placed as close as possible to the pin.
6	SWITCH	output	Switching node between the internal high-side and low-side power MOSFETs. Connect to an external inductor (typ. 3.3uH-6.8uH) and output capacitor forming the LC filter that produces the regulated DC output. Also serves as the return for the BOOT bootstrap capacitor. Absolute max -1V to +20V.

Key specifications

Parameter	Value
Manufacturer	Everanalog IC design
Package	SOT-23-6
Category	PMIC
Pins	6

Ordering variants

Same part, different packaging or reel option.

EA8212HT6R

CAD (KiCad official)

Symbol: EA8212HT6R
Footprint: Package_TO_SOT_SMD:SOT-23-6
3D model: SOT-23-6 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`ea8212ht6r.step`	97 KB	You want the bare part, or you mark your own boards.
`ea8212ht6r-etched.step`	1.9 MB	You want the part with `EA8212HT6R` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 480 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Everanalog IC design datasheet (10 pp, sha256 91a56ea8f39197cd, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF