DRV8833

@@ -3,8 +3,9 @@   "type": "component",   "slug": "drv8833",   "title": "DRV8833",-  "brief": "Dual H-bridge motor driver, 1.5A per channel, TSSOP-16",+  "brief": "TI dual H-bridge motor driver, HTSSOP-16. 2 DC motors or 1 stepper, 1.5 A/ch, 2.7-10.8 V. Datasheet-verified.",   "version": "0.1.0",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "motor-driver",@@ -13,36 +14,174 @@     "htssop-16",     "texas-instruments"   ],-  "license": "MIT",   "component": {     "mpn": "DRV8833",     "manufacturer": "Texas Instruments",-    "package": "TSSOP-16",-    "pin_count": null,-    "category": "library",-    "subcategory": "",-    "body_size": null,-    "parts": {},-    "distributor_links": {}+    "package": "HTSSOP-16 (PowerPAD)",+    "pin_count": 16,+    "category": "Motor Driver",+    "subcategory": "Dual H-bridge motor driver",+    "datasheet": "https://www.ti.com/lit/ds/symlink/drv8833.pdf",+    "parts": {+      "symbol": "drv8833.kicad_sym",+      "footprint": "drv8833.kicad_mod",+      "model_3d": "drv8833.glb"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "nSLEEP",+        "type": "input",+        "description": "Sleep mode input. Logic high enables the device; logic low enters low-power sleep mode and resets all internal logic. Has an internal 500 k\u03a9 pulldown. VIH \u2265 2.5 V, VIL \u2264 0.5 V."+      },+      {+        "number": "2",+        "name": "AOUT1",+        "type": "output",+        "description": "Bridge A output 1. Connects to one terminal of motor winding A. Driven by the internal N-channel H-bridge FETs (HS+LS RDS(on) \u2248 360 m\u03a9). Rated up to 1.5-A RMS / 2-A peak per bridge."+      },+      {+        "number": "3",+        "name": "AISEN",+        "type": "bidirectional",+        "description": "Bridge A ground / current-sense return. Connect to a current-sense resistor to GND for PWM current chopping (VTRIP = 200 mV typ.), or tie directly to GND if current control is not needed."+      },+      {+        "number": "4",+        "name": "AOUT2",+        "type": "output",+        "description": "Bridge A output 2. Connects to the second terminal of motor winding A. Complementary half of bridge A, driven by internal N-channel H-bridge FETs."+      },+      {+        "number": "5",+        "name": "BOUT2",+        "type": "output",+        "description": "Bridge B output 2. Connects to the second terminal of motor winding B. Driven by internal N-channel H-bridge FETs."+      },+      {+        "number": "6",+        "name": "BISEN",+        "type": "bidirectional",+        "description": "Bridge B ground / current-sense return. Connect to a current-sense resistor to GND for PWM current chopping, or tie directly to GND if current control is not needed."+      },+      {+        "number": "7",+        "name": "BOUT1",+        "type": "output",+        "description": "Bridge B output 1. Connects to one terminal of motor winding B. Driven by internal N-channel H-bridge FETs."+      },+      {+        "number": "8",+        "name": "nFAULT",+        "type": "output",+        "description": "Open-drain fault output. Pulled low when a fault condition (overtemperature, overcurrent) is detected. Requires an external pullup to logic-supply rail. VOL \u2264 0.5 V at IO = 5 mA."+      },+      {+        "number": "9",+        "name": "BIN1",+        "type": "input",+        "description": "Bridge B input 1. Logic input controls the state of BOUT1 (see H-bridge truth table). Has an internal 150 k\u03a9 pulldown. VIH \u2265 2 V, VIL \u2264 0.7 V."+      },+      {+        "number": "10",+        "name": "BIN2",+        "type": "input",+        "description": "Bridge B input 2. Logic input controls the state of BOUT2 (see H-bridge truth table). Has an internal 150 k\u03a9 pulldown. VIH \u2265 2 V, VIL \u2264 0.7 V."+      },+      {+        "number": "11",+        "name": "VCP",+        "type": "power_out",+        "description": "High-side gate drive voltage from the internal charge pump. Connect a 0.01-\u00b5F, 16-V (minimum) X7R ceramic capacitor to VM."+      },+      {+        "number": "12",+        "name": "VM",+        "type": "power_in",+        "description": "Device motor power supply (2.7 V to 10.8 V operating; 11.8 V abs max). Connect a 10-\u00b5F (minimum) ceramic bypass capacitor to GND."+      },+      {+        "number": "13",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground. The HTSSOP package has a PowerPAD that must also be tied to this GND for both grounding and thermal dissipation."+      },+      {+        "number": "14",+        "name": "VINT",+        "type": "power_out",+        "description": "Internal regulator supply bypass. Bypass to GND with a 2.2-\u00b5F, 6.3-V (minimum) ceramic capacitor. Do not load externally."+      },+      {+        "number": "15",+        "name": "AIN2",+        "type": "input",+        "description": "Bridge A input 2. Logic input controls the state of AOUT2 (see H-bridge truth table). Has an internal 150 k\u03a9 pulldown. VIH \u2265 2 V, VIL \u2264 0.7 V."+      },+      {+        "number": "16",+        "name": "AIN1",+        "type": "input",+        "description": "Bridge A input 1. Logic input controls the state of AOUT1 (see H-bridge truth table). Has an internal 150 k\u03a9 pulldown. VIH \u2265 2 V, VIL \u2264 0.7 V."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/drv8833.pdf",+        "pages": 30,+        "sha256": "3e400e333f08f1b9",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   },-  "readme": "# DRV8833\n\nDual H-bridge motor driver, 1.5A per channel, TSSOP-16\n\nThe DRV8833 is a dual H-bridge motor driver from Texas Instruments. It can drive two DC motors or one stepper motor at up to 1.5A per channel with integrated current regulation and low-power sleep mode.",+  "metadata": {+    "specs": {+      "Type": "Dual H-bridge motor driver",+      "Loads": "2 DC motors / 1 bipolar stepper / solenoids",+      "Output current": "1.5 A RMS per bridge (2 A peak)",+      "Supply voltage": "2.7-10.8 V",+      "Control": "IN/IN PWM per bridge, nSLEEP",+      "Protection": "Overcurrent, thermal, UVLO, nFAULT",+      "Package": "HTSSOP-16 (PowerPAD)",+      "Body (L\u00d7W\u00d7H)": "5.0 \u00d7 4.4 \u00d7 1.1 mm"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "drv8833",+    "dual h-bridge motor driver",+    "stepper driver ic",+    "dc motor driver"+  ],+  "discovery_pitch": "DRV8833 dual H-bridge motor driver (HTSSOP-16) with datasheet-verified pinout, KiCad symbol/footprint/3D, and full provenance.",   "author": {-    "name": "Kyle Bergstedt",-    "email": "[email protected]"+    "name": "Ray",+    "email": "[email protected]"   },-  "visibility": "public",+  "dependencies": {},   "hero": {     "type": "image",     "path": "docs/hero.png"   },-  "sample_prompts": [],-  "discovery_triggers": [],-  "discovery_pitch": null,-  "metadata": {},-  "created_at": "2026-05-28T05:33:26.478Z",-  "updated_at": "2026-05-28T05:33:26.478Z",-  "description": "TI dual H-bridge motor driver, HTSSOP-16. 2 DC motors or 1 stepper, 1.5 A/ch, 2.7-10.8 V. Datasheet-verified.",-  "dependencies": {},   "files": [     "page.json",     "README.md",