Contents

README

markdown

COS2172SRA

COSINE · Operational Amplifier · SOP-8

COS2172SRA from COSINE, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of amplifier A. Output voltage swing extends to within ~500mV of each supply rail (RRIO) with sourcing capability of +40mA and sinking of -48mA short-circuit current.
2 -IN1 input Inverting input of amplifier A. Voltage range of this pin can go from -Vs -0.3V to +Vs + 0.3V. Input terminals are diode-clamped to the power-supply rails; limit current to ±10mA if signal exceeds the rails by 0.5V.
3 +IN1 input Non-inverting input of amplifier A. Same voltage range as -IN1 (-Vs -0.3V to +Vs +0.3V). Rail-to-rail input; common-mode range spans V-S -0.1V to V+S -2V per the electrical characteristics.
4 -Vs power_in Negative power supply or ground. For single-supply operation tie to GND; for dual-supply operation tie to the negative rail (down to -20V). Bypass with a 0.1µF ceramic capacitor placed close to the pin if not connected directly to ground.
5 +IN2 input Non-inverting input of amplifier B. Same voltage range as -IN2 (-Vs -0.3V to +Vs +0.3V). Rail-to-rail input capability.
6 -IN2 input Inverting input of amplifier B. Voltage range from -Vs -0.3V to +Vs +0.3V. Input terminals are diode-clamped to the supply rails.
7 OUT2 output Output of amplifier B. Rail-to-rail output that swings to within ~500mV of each supply rail with a 10kΩ load at Vs=40V.
8 +Vs power_in Positive power supply, 4.5V to 40V single-supply (or up to +20V in dual-supply operation). Quiescent current is 1.2mA per amplifier. Bypass with a 0.1µF ceramic capacitor placed as close to the pin as possible; a 2.2µF tantalum capacitor may be added for better performance.

Key specifications

Parameter Value
Manufacturer COSINE
Package SOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

  • COS2172SRA
  • COS2172SRASRB
  • COS2172SRASRC

CAD (KiCad official)

  • Symbol: COS2172SRA
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: COSINE datasheet (None pp, sha256 43532e1ca41da013, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗