component
CD74HC4316M96
Public Unreviewedby Ray
Texas Instruments Analog Switches / Multiplexers, SOIC-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownCD74HC4316M96
Texas Instruments · Analog Switches / Multiplexers · SOIC-16
CD74HC4316M96 from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1Z | bidirectional | Analog input/output of switch 1 (Z side). Swings between VEE and VCC when the switch is enabled; presents high impedance when the switch is off. |
| 2 | 1Y | bidirectional | Analog input/output of switch 1 (Y side). Connected to 1Z through the analog switch when 1S is high and E is low. |
| 3 | 2Y | bidirectional | Analog input/output of switch 2 (Y side). Connected to 2Z when switch 2 is enabled. |
| 4 | 2Z | bidirectional | Analog input/output of switch 2 (Z side). Signal range VEE..VCC. |
| 5 | 2S | input | Digital control for switch 2. Logic high (with E low) closes switch 2; logic low opens it. Input swings between GND and VCC. |
| 6 | 3S | input | Digital control for switch 3. Logic high (with E low) closes switch 3. |
| 7 | E | input | Active-low common enable. When E is low each switch responds to its own S control input; when E is high all four switches are forced OFF. |
| 8 | GND | power_in | Digital ground reference (0 V). Reference for the S and E control-logic inputs. |
| 9 | VEE | power_in | Negative analog supply. Sets the lower limit of the analog signal range. 0 V to -6 V recommended; VCC-VEE must be 2 V to 10 V. |
| 10 | 3Z | bidirectional | Analog input/output of switch 3 (Z side). Signal range VEE..VCC. |
| 11 | 3Y | bidirectional | Analog input/output of switch 3 (Y side). Connected to 3Z when switch 3 is enabled. |
| 12 | 4Y | bidirectional | Analog input/output of switch 4 (Y side). Connected to 4Z when switch 4 is enabled. |
| 13 | 4Z | bidirectional | Analog input/output of switch 4 (Z side). Signal range VEE..VCC. |
| 14 | 4S | input | Digital control for switch 4. Logic high (with E low) closes switch 4. |
| 15 | 1S | input | Digital control for switch 1. Logic high (with E low) closes switch 1. |
| 16 | VCC | power_in | Positive supply. Powers the level-translation and control logic and sets the upper limit of the analog signal range. 2 V to 6 V (HC); VCC-VEE up to 10 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Ordering variants
Same part, different packaging or reel option.
CD74HC4316M96MCD74HC4316M96CD74HC4316M96MTCD74HC4316M96PWCD74HC4316M96PWRCD74HC4316M96E
CAD (KiCad official)
- Symbol:
CD74HC4316M96 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
258b20626385a943, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).