CC6902SO-20A from Cross chip, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	IP+	passive	Positive terminal of the primary sampled-current conductor. Pins 1 and 2 are tied together internally and must be paralleled on the PCB to carry the sensed current into the die's integrated low-impedance conductor.
2	IP+	passive	Second positive terminal of the primary sampled-current conductor, internally common with pin 1. Both pins must be paralleled for full current-handling capability.
3	IP-	passive	Negative terminal of the primary sampled-current conductor. Pins 3 and 4 are internally common and must be paralleled on the PCB to complete the sensed-current return path.
4	IP-	passive	Second negative terminal of the primary sampled-current conductor, internally common with pin 3. Both pins must be paralleled for full current-handling capability.
5	GND	power_in	Signal-side ground reference for the Hall front-end, output amplifier, and VCC decoupling.
6	NC	unconnected	No internal connection. Must be left floating (需悬空); do not connect to any net or plane.
7	OUT	output	Ratiometric single-ended analog output. Quiescent output is 50% VCC with no field; for the -20A variant, sensitivity is 100 mV/A and the output swings linearly across ~0.5 V to 4.5 V (at VCC = 5 V) with the primary current through IP+/IP-.
8	VCC	power_in	Signal-side supply input, typically 5 V. Bypass locally to GND (pin 5) with a low-ESR ceramic capacitor for chopper-noise filtering.

Key specifications

Parameter	Value
Manufacturer	Cross chip
Package	SOP-8
Category	Sensor
Pins	8

Ordering variants

Same part, different packaging or reel option.

CC6902SO-20A

CAD (KiCad official)

Symbol: CC6902SO-20A
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOP-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`cc6902so-20a.step`	122 KB	You want the bare part, or you mark your own boards.
`cc6902so-20a-etched.step`	2.8 MB	You want the part with `CC6902SO-20A` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 649 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Cross chip datasheet (3 pp, sha256 bd4558c14185b3b8, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF