CC6207ST from Cross chip, in a TSOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VDD	power_in	Positive supply voltage input, 2.0V to 5.5V (absolute max -0.3V to 5.5V). Bypass with 0.1uF to GND close to the pin.
2	VOUT	output	Open-drain / CMOS latch output. Drives low (V_OL <= 0.2V @ 0.5mA sink) when the operating point is exceeded and latches high (V_OH >= VDD-0.2V @ 0.5mA source) after the release point. Source and sink capability 0.5mA.
3	GND	power_in	Ground reference for supply and output.

Key specifications

Parameter	Value
Manufacturer	Cross chip
Package	TSOT-23-3
Category	Sensor
Pins	3

Ordering variants

Same part, different packaging or reel option.

CC6207ST
CC6207STTO
CC6207STDN
CC6207STBP1010

CAD (KiCad official)

Symbol: CC6207ST
Footprint: Package_TO_SOT_SMD:SOT-23-3
3D model: TSOT-23-3 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`cc6207st.step`	59 KB	You want the bare part, or you mark your own boards.
`cc6207st-etched.step`	1.6 MB	You want the part with `CC6207ST` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 384 faces against 69 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Cross chip datasheet (16 pp, sha256 083f748ffa57fa4c, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF