component

CC6207ST

Public Made by Adom

by adom

Cross chip Hall Sensor, TSOT-23-3. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentsensorcc6207st
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs cc6207st: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
cc6207st-etched.fit.json cc6207st: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
cc6207st-etched.glb cc6207st: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
cc6207st-etched.step cc6207st: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
cc6207st.glb Publish 0.1.0 · Ray 1mo ago
cc6207st.kicad_mod Publish 0.1.0 · Ray 1mo ago
cc6207st.kicad_sym Publish 0.1.0 · Ray 1mo ago
cc6207st.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect and oval pad as a SQUARE EAGLE smd; this carries the real pad shape across (0 -> 3 rounded pads) and stops dropping geometry drawn on KiCad User.N layers. Attributes, connects, pads and the pin-1 marker are gated against decreasing and are unchanged. · Ray 1mo ago
cc6207st.step Publish 0.1.0 · Ray 1mo ago
package.json Publish 0.2.0 · Ray 1mo ago
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
page.json Brief states the pinout check that actually ran (was an unconditional "Datasheet-verified pinout") · Ray 11d ago
README.md cc6207st: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 18d ago

CC6207ST

Cross chip · Hall Sensor · TSOT-23-3

CC6207ST from Cross chip, in a TSOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply voltage input, 2.0V to 5.5V (absolute max -0.3V to 5.5V). Bypass with 0.1uF to GND close to the pin.
2 VOUT output Open-drain / CMOS latch output. Drives low (V_OL <= 0.2V @ 0.5mA sink) when the operating point is exceeded and latches high (V_OH >= VDD-0.2V @ 0.5mA source) after the release point. Source and sink capability 0.5mA.
3 GND power_in Ground reference for supply and output.

Key specifications

Parameter Value
Manufacturer Cross chip
Package TSOT-23-3
Category Sensor
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • CC6207ST
  • CC6207STTO
  • CC6207STDN
  • CC6207STBP1010

CAD (KiCad official)

  • Symbol: CC6207ST
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: TSOT-23-3 (KiCad packages3D, STEP)
  • 3D model files: cc6207st-etched.step / cc6207st-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); cc6207st.step / cc6207st.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
cc6207st.step 59 KB You want the bare part, or you mark your own boards.
cc6207st-etched.step 1.6 MB You want the part with CC6207ST already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 384 faces against 69 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Cross chip datasheet (16 pp, sha256 083f748ffa57fa4c, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF