CC6111TO from Cross chip, in a TO-92S. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VDD	power_in	Supply voltage input. Operating range 2.5-28 V; absolute-max 30 V; reverse-supply protection to -40 V. Typical IDD ~2 mA at 12 V.
2	GND	power_in	Ground reference for the device.
3	OUT	output	Open-drain Hall-switch output. Sinks up to 30 mA (current-limited 30-60 mA), VSAT ≤ 0.4 V at 20 mA sink, 30 V breakdown. Requires an external pull-up resistor.

Key specifications

Parameter	Value
Manufacturer	Cross chip
Package	TO-92S
Category	Sensor
Pins	3

Ordering variants

Same part, different packaging or reel option.

CC6111TO
CC6111TOST

CAD (KiCad official)

Symbol: CC6111TO
Footprint: Package_TO_SOT_THT:TO-92_Inline
3D model: TO-92S (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`cc6111to.step`	27 KB	You want the bare part, or you mark your own boards.
`cc6111to-etched.step`	1.1 MB	You want the part with `CC6111TO` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 281 faces against 19 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Cross chip datasheet (6 pp, sha256 74c97822219f5a69, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF