component

CC6111TO

Public Made by Adom

by adom

Cross chip Hall Sensor, TO-92S. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentsensorcc6111to
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs cc6111to: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (pad-position, synthesised, bottom-right) · Ray 1mo ago
cc6111to-etched.fit.json cc6111to: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
cc6111to-etched.glb cc6111to: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
cc6111to-etched.step cc6111to: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
cc6111to.glb Publish 0.1.0 · Ray 1mo ago
cc6111to.kicad_mod Publish 0.1.0 · Ray 1mo ago
cc6111to.kicad_sym Publish 0.1.0 · Ray 1mo ago
cc6111to.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect and oval pad as a SQUARE EAGLE smd; this carries the real pad shape across (0 -> 0 rounded pads) and stops dropping geometry drawn on KiCad User.N layers. Attributes, connects, pads and the pin-1 marker are gated against decreasing and are unchanged. · Ray 1mo ago
cc6111to.step Publish 0.1.0 · Ray 1mo ago
package.json Publish 0.2.0 · Ray 1mo ago
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (pad-position, synthesised, bottom-right) · Ray 1mo ago
page.json Brief states the pinout check that actually ran (was an unconditional "Datasheet-verified pinout") · Ray 11d ago
README.md cc6111to: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 18d ago

CC6111TO

Cross chip · Hall Sensor · TO-92S

CC6111TO from Cross chip, in a TO-92S. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Supply voltage input. Operating range 2.5-28 V; absolute-max 30 V; reverse-supply protection to -40 V. Typical IDD ~2 mA at 12 V.
2 GND power_in Ground reference for the device.
3 OUT output Open-drain Hall-switch output. Sinks up to 30 mA (current-limited 30-60 mA), VSAT ≤ 0.4 V at 20 mA sink, 30 V breakdown. Requires an external pull-up resistor.

Key specifications

Parameter Value
Manufacturer Cross chip
Package TO-92S
Category Sensor
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • CC6111TO
  • CC6111TOST

CAD (KiCad official)

  • Symbol: CC6111TO
  • Footprint: Package_TO_SOT_THT:TO-92_Inline
  • 3D model: TO-92S (KiCad packages3D, STEP)
  • 3D model files: cc6111to-etched.step / cc6111to-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); cc6111to.step / cc6111to.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
cc6111to.step 27 KB You want the bare part, or you mark your own boards.
cc6111to-etched.step 1.1 MB You want the part with CC6111TO already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 281 faces against 19 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Cross chip datasheet (6 pp, sha256 74c97822219f5a69, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF