component
bd433m5fp-ce2
Public Unreviewedby Ray
ROHM Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-252. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
README
markdownBD433M5FP-CE2
ROHM · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252
BD433M5FP-CE2 from ROHM, in a TO-252. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage input pin. Absolute maximum -0.3 V to +45.0 V; recommended operating range 4.0 V to 42 V (start-up 3.0 V min at IOUT = 0 mA). Bypass to GND with CIN ≥ 0.1 µF located close to the pin. |
| 2 | N.C. | unconnected | Not Connected internally. May be left open, but ROHM recommends shorting to GND on the PCB for best practice. |
| 3 | VOUT | power_out | Regulated 3.3 V (Typ., ±2 %) output pin. Delivers up to 500 mA. Requires COUT ≥ 10 µF (Typ., ≥ 6 µF over temp/DC-bias) between VOUT and GND for stable operation; ceramic (X5R/X7R), tantalum, or electrolytic accepted. Absolute max VOUT range -0.3 V to +8.0 V. |
| 4 | GND | power_in | Ground / exposed thermal tab (FIN) on the back of the TO-252-3 package. Also serves as the primary heat-sinking path - solder to a copper pour for improved θJA. Keep at the lowest system potential under all operating conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ROHM |
| Package | TO-252 |
| Category | PMIC |
| Pins | 4 |
Ordering variants
BD433M5FP-CE2BD433M5FP-CE2BD433M5FP2-CZE2BD433M5FP-CE2BD433M5WFPJ-CZE2BD433M5FP-CE2BD433M5WFP2-CZE2
CAD (KiCad official)
- Symbol:
BD433M5FP-CE2 - Footprint:
Package_TO_SOT_SMD:TO-252-2 - 3D model: TO-252 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ROHM datasheet (None pp, sha256
36010bae6b7825a0, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).