AZ1117CH-5.0TRG1
Public Unreviewedby Ray
Diodes Incorporated AZ1117CH 5 0TRG1 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownAZ1117CH-5.0TRG1
Diodes Incorporated AZ1117CH 5 0TRG1 · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223
AZ1117CH-5.0TRG1 from Diodes Incorporated AZ1117CH 5 0TRG1, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the regulator. On the fixed-voltage AZ1117CH-5.0 the ADJ/GND pin functions as the device ground return. |
| 2 | VOUT | power_out | Regulated 5.0V output (typ 5.0V, ±1%). Requires a minimum 10µF output capacitor with ESR < 20Ω for stability; supplies up to ~1A load current within the current-limit of 1.35A typical. |
| 3 | VIN | power_in | Unregulated input supply. Recommended operating input voltage up to 15V (18V absolute max). Requires at least VOUT + VDROP (typ 1.2V @ 0.8A) headroom. |
| 4 | VOUT | power_out | Tab / heat-slug pad, electrically connected to VOUT (pin 2). Provides the primary thermal path; solder to a copper pour for heat sinking (θJA ≈ 125°C/W without heatsink for SOT-223). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated AZ1117CH 5 0TRG1 |
| Package | SOT-223 |
| Category | PMIC |
| Pins | 4 |
Ordering variants
AZ1117CH-5.0TRG1AZ1117CH-5.0TRG1H2AZ1117CH-5.0TRG1RAZ1117CH-5.0TRG1R2AZ1117CH-5.0TRG1TO252-2 (3)AZ1117CH-5.0TRG1TO252-2 (4)AZ1117CH-5.0TRG1TO252-2 (5)
CAD (KiCad official)
- Symbol:
AZ1117CH-5.0TRG1 - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
az1117ch-5-0trg1.step |
64 KB | You want the bare part, or you mark your own boards. |
az1117ch-5-0trg1-etched.step |
2.1 MB | You want the part with AZ1117CH-5.0TRG1 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 539 faces against 75 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated AZ1117CH 5 0TRG1 datasheet (24 pp, sha256
8333717aa7b5f90f, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).