component
at24c16n
Public Unreviewedby Ray
HGSEMI EEPROM, DIP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
README
markdownAT24C16N
HGSEMI · EEPROM · DIP-8
AT24C16N from HGSEMI, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect. Not internally bonded; leave floating or tie to any convenient net. |
| 2 | NC | unconnected | No connect. Not internally bonded; leave floating or tie to any convenient net. |
| 3 | NC | unconnected | No connect on the AT24C16 (this pin is the E2 slave-address input on the AT24C08 variant only). |
| 4 | Vss | power_in | Ground reference for VCC. Connect to system ground (0 V). |
| 5 | SDA | bidirectional | Serial data input/output for the I2C bus. Open-drain output; requires an external pull-up resistor to VCC. May be wire-OR'ed with other open-drain devices on the bus. Input capacitance 8 pF max. |
| 6 | SCL | input | Serial clock input for the I2C bus (up to 400 kHz or 1 MHz depending on VCC). Data is clocked in on positive edges and clocked out on negative edges. Schmitt-trigger, filtered input; input capacitance 6 pF max. |
| 7 | WCB | input | Write-Control input (active-low write enable). Tie to Vss to allow normal write operations, or tie to VCC to inhibit all writes to the memory array. Internally pulled down to Vss if left floating. Input capacitance 6 pF max. |
| 8 | VCC | power_in | Supply voltage input, 1.7 V to 5.5 V. Read current ~0.2 mA and write current ~0.8 mA at 400 kHz (typical). Standby current 0.5-1.0 uA at 1.7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | DIP-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
AT24C16NNAT24C16NM/TRAT24C16NMT/TRAT24C16NMM/TRAT24C16NDQ3/TRAT24C16NDQ2/TRAT24C16NM5/TR
CAD (KiCad official)
- Symbol:
AT24C16N - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (None pp, sha256
3e86ae75d43fb087, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).