APX809-46SAG-7 from Diodes Incorporated, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	GND	power_in	Device ground reference. Connect to system ground.
2	RESET	output	Active-low push-pull reset output (APX809 family). Asserted low whenever VCC falls below the 4.63V reset threshold and held low for at least 240ms (typ 200ms) after VCC rises back above the threshold. Guaranteed valid to VCC = 1V; VOL <= 0.3V at ISINK = 1.2mA.
3	VCC	power_in	Operating voltage input; the monitored supply rail. Recommended operating range 1.1V to 5.5V, absolute max +6.0V. Typical quiescent current 30µA. A 100nF decoupling capacitor from VCC to GND is recommended.

Key specifications

Parameter	Value
Manufacturer	Diodes Incorporated
Package	SOT-23
Category	PMIC
Pins	3

Ordering variants

APX809-46SAG-7
APX809-46SAG-7APX809-46SRG-7

CAD (KiCad official)

Symbol: APX809-46SAG-7
Footprint: Package_TO_SOT_SMD:SOT-23
3D model: SOT-23 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`apx809-46sag-7.step`	59 KB	You want the bare part, or you mark your own boards.
`apx809-46sag-7-etched.step`	2.4 MB	You want the part with `APX809-46SAG-7` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 574 faces against 69 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Diodes Incorporated datasheet (8 pp, sha256 6cea3bdb5cde9297, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF