AP7361-10ER-13
Public Unreviewedby Ray
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223R. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownAP7361-10ER-13
Diodes Incorporated · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223R
AP7361-10ER-13 from Diodes Incorporated, in a SOT-223R. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input, active high. Device is turned on when EN is at logic high (VIH >= 1.0V); logic low (<= 0.3V) disables the regulator. Do not float. EN input leakage ±0.1µA typ. |
| 2 | GND | power_in | Ground reference for the regulator. Also serves as the thermal path for the SOT89-5 tab. |
| 3 | ADJ/NC | unconnected | On the adjustable variant this is the ADJ feedback pin (resistor divider from OUT to ADJ sets Vout, VREF = 0.8V). On the fixed 1.0V variant (-10E) this pin has no internal connection and should be left open. |
| 4 | IN | power_in | Regulator input supply, 2.2V to 6.0V recommended (6.5V absolute max). Bypass to GND with at least 1µF ceramic capacitor placed close to the pin. |
| 5 | OUT | power_out | Regulated output, 1.0V nominal for the -10 option, up to 1A. Bypass to GND with at least 2.2µF ceramic capacitor (4.7µF recommended for improved AC load response). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-223R |
| Category | PMIC |
| Pins | 5 |
Ordering variants
AP7361-10ER-13
CAD (KiCad official)
- Symbol:
AP7361-10ER-13 - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223R (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
ap7361-10er-13.step |
64 KB | You want the bare part, or you mark your own boards. |
ap7361-10er-13-etched.step |
2.2 MB | You want the part with AP7361-10ER-13 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 551 faces against 75 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (22 pp, sha256
fd84e397b31647d7, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).