component

AP7361-10ER-13

Public Unreviewed

by Ray

Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223R. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentpmicap7361-10er-13
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗

Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗
Contents

README

markdown

AP7361-10ER-13

Diodes Incorporated · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223R

AP7361-10ER-13 from Diodes Incorporated, in a SOT-223R. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable input, active high. Device is turned on when EN is at logic high (VIH >= 1.0V); logic low (<= 0.3V) disables the regulator. Do not float. EN input leakage ±0.1µA typ.
2 GND power_in Ground reference for the regulator. Also serves as the thermal path for the SOT89-5 tab.
3 ADJ/NC unconnected On the adjustable variant this is the ADJ feedback pin (resistor divider from OUT to ADJ sets Vout, VREF = 0.8V). On the fixed 1.0V variant (-10E) this pin has no internal connection and should be left open.
4 IN power_in Regulator input supply, 2.2V to 6.0V recommended (6.5V absolute max). Bypass to GND with at least 1µF ceramic capacitor placed close to the pin.
5 OUT power_out Regulated output, 1.0V nominal for the -10 option, up to 1A. Bypass to GND with at least 2.2µF ceramic capacitor (4.7µF recommended for improved AC load response).

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package SOT-223R
Category PMIC
Pins 5

Ordering variants

  • AP7361-10ER-13

CAD (KiCad official)

  • Symbol: AP7361-10ER-13
  • Footprint: Package_TO_SOT_SMD:SOT-223-3_TabPin2
  • 3D model: SOT-223R (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
ap7361-10er-13.step 64 KB You want the bare part, or you mark your own boards.
ap7361-10er-13-etched.step 2.2 MB You want the part with AP7361-10ER-13 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 551 faces against 75 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (22 pp, sha256 fd84e397b31647d7, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF