AP7312-1833W6-7
Public Unreviewedby Ray
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-26. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownAP7312-1833W6-7
Diodes Incorporated · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-26
AP7312-1833W6-7 from Diodes Incorporated, in a SOT-26. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT2 | power_out | Voltage output 2 (3.3V nominal for the -1833 option). Bypass to ground through a 1µF ceramic capacitor. Rated up to 150mA continuous. |
| 2 | GND | power_in | Device ground reference for both regulator channels and internal control circuitry. |
| 3 | EN2 | input | Enable input for channel 2 (OUT2), active high. VIH ≥ 1.4V enables the regulator; VIL ≤ 0.4V shuts it down. EN input current ±1µA max. |
| 4 | EN1 | input | Enable input for channel 1 (OUT1), active high. VIH ≥ 1.4V enables the regulator; VIL ≤ 0.4V shuts it down. EN input current ±1µA max. |
| 5 | IN | power_in | Supply voltage input for both regulator channels. Operating range 2V to 6V (absolute max 6.5V). Bypass to ground through at least a 1µF capacitor. |
| 6 | OUT1 | power_out | Voltage output 1 (1.8V nominal for the -1833 option). Bypass to ground through a 1µF ceramic capacitor. Rated up to 150mA continuous. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-26 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
AP7312-1833W6-7AP7312-1833W6-7FDC
CAD (KiCad official)
- Symbol:
AP7312-1833W6-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-26 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
ap7312-1833w6-7.step |
97 KB | You want the bare part, or you mark your own boards. |
ap7312-1833w6-7-etched.step |
2.6 MB | You want the part with AP7312-1833W6-7 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 640 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (18 pp, sha256
1b2f6890ecd009a0, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).