Contents

README

markdown

AP3125AKTR-G1

Diodes Incorporated · AC-DC Controllers and Regulators · SOT-26

AP3125AKTR-G1 from Diodes Incorporated, in a SOT-26. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Signal ground. Current return for driver and control circuits.
2 FB input Feedback input directly connected to opto-coupler. Input impedance ~15kΩ, sources ~0.27mA when pulled low; controls peak inductor current via IPK=(VFB-0.8)/(3·RS). VFB>4.5V for ~70ms triggers OLP hiccup; VFB<1.55V stops drive pulses (zero-duty threshold). Green-mode threshold ~2.1V.
3 CTRL bidirectional Latch trigger pin. Sources ~100μA; low-threshold trigger 1V (typ) and high-threshold trigger 3V (typ) invoke latch protection. Leave open if unused; connect an NTC thermistor to GND for external OTP protection. Max sourcing current must be limited below 5mA.
4 SENSE input Current sense input for primary MOSFET source current. Max sense voltage 0.95V (typ) with VFB=4.5V; FOCP threshold 1.7V (typ) with ~100ns delay; internal 250ns leading-edge blanking. Requires small RC filter/series resistor to protect against turn-off undershoot beyond -0.3V.
5 VCC power_in Supply voltage of driver and control circuits. Recommended 10-25V; UVLO(on)=15.8V typ, UVLO(off)=7.6V typ, VCC maintain ~9.1V, VCC OVP ~28.5V, internal clamp ~34V, absolute max 30V. Startup current ~1μA typ; operating current ~0.7-1.2mA.
6 GATE output Gate driver output for external power MOSFET. Output clamping voltage ~13V (typ), rise time ~150ns and fall time ~50ns into 1nF at VCC=13V, max output current 350mA. Max duty cycle 75% typ.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package SOT-26
Category PMIC
Pins 6

Ordering variants

  • AP3125AKTR-G1
  • AP3125AKTR-G1VKTR-G1
  • AP3125AKTR-G1LKTR-G1
  • AP3125AKTR-G1RKTR-G1

CAD (KiCad official)

  • Symbol: AP3125AKTR-G1
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-26 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (None pp, sha256 5c4b09361eff7f55, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗