component
AP2301MPG-13
Public Unreviewedby Ray
Diodes Incorporated AC-DC Controllers and Regulators, MSOP-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.
README
markdownAP2301MPG-13
Diodes Incorporated · AC-DC Controllers and Regulators · MSOP-8-EP
AP2301MPG-13 from Diodes Incorporated, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Device ground reference. All voltages in the datasheet are referred to this pin. |
| 2 | IN | power_in | Voltage input pin (2.7 V to 5.5 V). Connect a 0.1 µF or larger ceramic capacitor from IN to GND as close as possible. All IN pins (2, 3) must be tied together externally. |
| 3 | IN | power_in | Voltage input pin (2.7 V to 5.5 V). Second IN pad; must be tied to pin 2 externally to share input current. |
| 4 | EN | input | Enable input. Active low on AP2301 (this MPN). VIL ≤ 0.8 V, VIH ≥ 2.0 V. Do not leave floating; a pull-up (e.g. 10 kΩ) is recommended to hold the switch off by default. |
| 5 | FLG | output | Fault report output. Open-drain, active low, asserted on over-current or over-temperature with 7 ms (typ) deglitch. Disabled for 7 ms after turn-on. RFLG on-resistance ≈ 20 Ω typ. Requires an external pull-up resistor. |
| 6 | OUT | power_out | Switched voltage output to the load. All OUT pins (6, 7) must be tied together externally. Recommended 0.1 µF + bulk (e.g. 120 µF) output capacitance. |
| 7 | OUT | power_out | Switched voltage output pad; second OUT pin, tie externally to pin 6. |
| 8 | NC | unconnected | No internal connection. Recommended to tie to OUT pins for improved thermal/routing convenience. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | MSOP-8-EP |
| Category | PMIC |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
AP2301MPG-13AP2301MPG-13SG-13AP2301MPG-13MPTR-G1AP2301MPG-13FDC-7
CAD (KiCad official)
- Symbol:
AP2301MPG-13 - Footprint:
Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm - 3D model: MSOP-8-EP (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (18 pp, sha256
d17878575a204733, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).