AP22653AW6-7 from Diodes Incorporated, in a SOT-26. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	IN	power_in	Input supply, 3.0 V to 5.5 V. Source for the internal high-side power MOSFET. Decouple with a 0.1 µF (or larger) ceramic capacitor from IN to GND placed as close to the IC as possible.
2	GND	power_in	Device ground return. Recommended to tie to the exposed pad (on DFN variants) or to a solid ground pour on the PCB.
3	EN	input	Active-high enable. Logic high (VIH ≥ 1.5 V) turns on the internal power switch; logic low (VIL ≤ 0.4 V) disables it and activates the output-discharge path. Do not float; drive or pull to a defined level. Absolute-max 6.0 V; input leakage ±2 µA.
4	FAULT	output	Active-low, open-drain fault flag. Asserted during over-current, over-temperature, or reverse-voltage conditions. 6 ms (typ) blanking time; VOL ≤ 180 mV at IFAULT = 1 mA; maximum continuous sink current 25 mA. Requires an external pull-up resistor (e.g. 10 kΩ).
5	ILIM	input	Current-limit set pin. Connect an external resistor RLIM (10 kΩ ≤ RLIM ≤ 210 kΩ) from ILIM to GND to program the DC current limit (approx. 2665 mA at 10 kΩ down to 125 mA at 210 kΩ). Maximum source current 1 mA; do not exceed 6.0 V.
6	OUT	power_out	Switched output of the internal high-side MOSFET (RDS(ON) ≈ 65 mΩ typ at 5 V). Connect a 0.1 µF bypass capacitor and a bulk capacitor (≥10 µF, 120 µF for USB compliance) close to the pin. When disabled, an internal ~600 Ω discharge path pulls OUT toward GND.

Key specifications

Parameter	Value
Manufacturer	Diodes Incorporated
Package	SOT-26
Category	PMIC
Pins	6

Ordering variants

AP22653AW6-7
AP22653AW6-7FDZ-7

CAD (KiCad official)

Symbol: AP22653AW6-7
Footprint: Package_TO_SOT_SMD:SOT-23-6
3D model: SOT-26 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Diodes Incorporated datasheet (17 pp, sha256 b4b0d9edc2556bf4, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF