AP22652W6-7 from Diodes Incorporated, in a SOT-26. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT	power_out	Switched voltage output. Connect a 0.1 uF bypass capacitor and a high-value bulk capacitor (at least 10 uF in USB applications, e.g. 120 uF for USB VBUS compliance) close to the pin.
2	ILIM	output	Current-limit programming pin. Connect an external resistor RLIM from ILIM to GND (10 kOhm <= RLIM <= 210 kOhm) to set the current-limit threshold (125 mA to 2665 mA). Max source current 1 mA.
3	FAULT	output	Active-low open-drain fault flag. Asserted low during over-current, over-temperature, or reverse-voltage conditions. Requires an external pull-up (e.g. 10 kOhm). Continuous sink current up to 25 mA (10 mA recommended).
4	EN	input	Active-low enable input for the AP22652/AP22652A. Logic low turns the power switch ON; logic high (or float above VIH) disables the switch and initiates output discharge. VIH = 1.5 V to VIN, VIL = 0 to 0.4 V. Do not leave floating.
5	GND	power_in	Ground reference. Also tie the exposed pad to this net externally.
6	IN	power_in	Input supply (3.0 V to 5.5 V). Connect a 0.1 uF or greater ceramic decoupling capacitor from IN to GND as close to the IC as possible. Absolute max 6.0 V.
PAD	EP	power_in	Exposed thermal pad. Internal connection to GND; must be soldered to a GND copper pour externally for improved power dissipation. Not to be used as an electrical ground conduction path.

Key specifications

Parameter	Value
Manufacturer	Diodes Incorporated
Package	SOT-26
Category	PMIC
Pins	7

Ordering variants

AP22652W6-7
AP22652W6-7AP22653W6-7
AP22652W6-7AP22652AW6-7
AP22652W6-7AP22653AW6-7
AP22652W6-7AP22652FDZ-7
AP22652W6-7AP22653FDZ-7
AP22652W6-7AP22652AFDZ-7
AP22652W6-7AP22653AFDZ-7

CAD (KiCad official)

Symbol: AP22652W6-7
Footprint: Package_TO_SOT_SMD:SOT-23-6
3D model: SOT-26 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`ap22652w6-7.step`	97 KB	You want the bare part, or you mark your own boards.
`ap22652w6-7-etched.step`	2.1 MB	You want the part with `AP22652W6-7` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 509 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Diodes Incorporated datasheet (17 pp, sha256 37551442d8da9325, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF