component

AP22615AWU-7

Public Unreviewed

by Ray

Diodes Incorporated AC-DC Controllers and Regulators, TSOT-23-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentpmicap22615awu-7
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Datasheet

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF
Contents

README

markdown

AP22615AWU-7

Diodes Incorporated · AC-DC Controllers and Regulators · TSOT-23-6

AP22615AWU-7 from Diodes Incorporated, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Voltage output pin from the internal high-side power switch. Delivers up to 3A to the load; recommended 0.1 uF + 100 uF output capacitance. Integrated discharge circuitry pulls OUT down through ~100 ohm when disabled.
2 GND power_in Device ground reference for all internal circuitry.
3 FLG output Open-drain fault flag output, active-low when an overcurrent, overvoltage or over-temperature condition is detected. Requires an external pull-up (typ. 10 kohm). 7 ms deglitch blanking prevents false reporting; FLG FET R_DS(on) ~40 ohm at 10 mA.
4 EN input Enable input. AP22615 is available in both active-low and active-high polarities depending on the suffix. VIL <= 0.4 V, VIH >= 1.2 V, leakage 1-2 uA.
5 ISET input Current-limit set input. Connect a resistor R_LIM from ISET to GND to set the overcurrent threshold: I_LIM(A) = 6800 / R_LIM(ohm). Valid R_LIM range 1.94 k to 6.8 k, giving I_LIM from ~1 A to 4 A. Absolute max -0.3 V to (VIN + 0.3) V.
6 IN power_in Voltage input pin, 3.0 V to 5.5 V. Supplies the internal power FET and control circuitry; requires a bypass capacitor (10 uF recommended) close to the pin.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package TSOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • AP22615AWU-7
  • AP22815

CAD (KiCad official)

  • Symbol: AP22615AWU-7
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (17 pp, sha256 e5c6ff18574ccae8, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF