Contents

README

markdown

AP2176SG-13

Diodes Incorporated · AC-DC Controllers and Regulators · SOIC-8

AP2176SG-13 from Diodes Incorporated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN1 input Switch 1 enable input, active high on AP2176. Logic low ≤ 0.8V, logic high ≥ 2V (up to VIN, 6.5V absolute max). Input leakage ≤ 1µA at VEN = 5V.
2 FLG1 output Switch 1 over-current and over-temperature fault report, open-drain. Asserts low after ~7ms deglitch (4-15ms) during fault. Requires an external pull-up (e.g. 10kΩ). RFLG ≈ 20Ω typ (40Ω max) at IFLG = 10mA.
3 FLG2 output Switch 2 over-current and over-temperature fault report, open-drain. Asserts low after ~7ms deglitch during fault. Requires external pull-up. RFLG ≈ 20Ω typ at IFLG = 10mA.
4 EN2 input Switch 2 enable input, active high on AP2176. Logic low ≤ 0.8V, logic high ≥ 2V. Input leakage ≤ 1µA at VEN = 5V.
5 OUT2 power_out Switch 2 voltage output pin. Delivers up to 1.0A recommended continuous load current (1.5A typ current limit) from IN through the internal PMOS switch (RDS(ON) ≈ 100mΩ typ for SO-8 at VIN=5V). Bypass with 0.1µF ceramic and 68µF electrolytic recommended.
6 GND power_in Device ground reference.
7 IN power_in Voltage input pin (common supply feeding both channels). Operating range 2.7V to 5.5V (6.5V absolute max). UVLO releases at ~1.9V. Recommend 0.01-0.1µF X7R/X5R ceramic close to the pin plus ≥10µF electrolytic bulk.
8 OUT1 power_out Switch 1 voltage output pin. Delivers up to 1.0A recommended continuous load current (1.5A typ current limit). Bypass with 0.1µF ceramic and 68µF electrolytic recommended.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package SOIC-8
Category PMIC
Pins 8

Ordering variants

  • AP2176SG-13
  • AP2176SG-13AP2176MPG-13

CAD (KiCad official)

  • Symbol: AP2176SG-13
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (None pp, sha256 d5fae0a1229edb3c, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗