AM26LV32IDR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	1B	input	Receiver 1 RS-422/RS-485 differential input (inverting). Common-mode range -0.3 V to 5.5 V; differential threshold ±200 mV typical. Paired with 1A on pin 2.
2	1A	input	Receiver 1 RS-422/RS-485 differential input (noninverting). Common-mode range -0.3 V to 5.5 V; differential threshold ±200 mV typical. Paired with 1B on pin 1.
3	1Y	tri_state	Receiver 1 logic-level 3-state output. Drives VOH ≥ 2.4 V at IOH = -5 mA and VOL ≤ 0.5 V at IOL = 5 mA. High-impedance when enables disable the device.
4	G	input	Active-high output enable common to all four receivers. Logic 1 enables the 3-state Y outputs; VIH ≥ 2 V, VIL ≤ 0.8 V.
5	2Y	tri_state	Receiver 2 logic-level 3-state output. Drives VOH ≥ 2.4 V at IOH = -5 mA and VOL ≤ 0.5 V at IOL = 5 mA. High-impedance when enables disable the device.
6	2A	input	Receiver 2 RS-422/RS-485 differential input (noninverting). Common-mode range -0.3 V to 5.5 V; differential threshold ±200 mV typical. Paired with 2B on pin 7.
7	2B	input	Receiver 2 RS-422/RS-485 differential input (inverting). Common-mode range -0.3 V to 5.5 V; differential threshold ±200 mV typical. Paired with 2A on pin 6.
8	GND	power_in	Device ground reference. All voltages are measured with respect to this terminal.
9	3B	input	Receiver 3 RS-422/RS-485 differential input (inverting). Common-mode range -0.3 V to 5.5 V; differential threshold ±200 mV typical. Paired with 3A on pin 10.
10	3A	input	Receiver 3 RS-422/RS-485 differential input (noninverting). Common-mode range -0.3 V to 5.5 V; differential threshold ±200 mV typical. Paired with 3B on pin 9.
11	3Y	tri_state	Receiver 3 logic-level 3-state output. Drives VOH ≥ 2.4 V at IOH = -5 mA and VOL ≤ 0.5 V at IOL = 5 mA. High-impedance when enables disable the device.
12	/G	input	Active-low output enable common to all four receivers. Logic 0 enables the 3-state Y outputs; VIH ≥ 2 V, VIL ≤ 0.8 V. Together with G on pin 4, allows either active-high or active-low enable operation.
13	4Y	tri_state	Receiver 4 logic-level 3-state output. Drives VOH ≥ 2.4 V at IOH = -5 mA and VOL ≤ 0.5 V at IOL = 5 mA. High-impedance when enables disable the device.
14	4A	input	Receiver 4 RS-422/RS-485 differential input (noninverting). Common-mode range -0.3 V to 5.5 V; differential threshold ±200 mV typical. Paired with 4B on pin 15.
15	4B	input	Receiver 4 RS-422/RS-485 differential input (inverting). Common-mode range -0.3 V to 5.5 V; differential threshold ±200 mV typical. Paired with 4A on pin 14.
16	VCC	power_in	Positive supply voltage. Recommended operating range 3 V to 3.6 V (3.3 V nominal); absolute maximum 6 V. Bypass with a decoupling capacitor to GND.

Key specifications

Parameter	Value
Manufacturer	Texas Instruments
Package	SOIC-16
Category	Interface
Pins	16

Ordering variants

AM26LV32IDRD
AM26LV32IDR
AM26LV32IDRNS
AM26LV32IDRNSR

CAD (KiCad official)

Symbol: AM26LV32IDR
Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
3D model: SOIC-16 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Texas Instruments datasheet (30 pp, sha256 e4980e215a92b037, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF