component
AH1711-SA-7
Public Unreviewedby Ray
Diodes Incorporated Linear Hall Sensors, SOT-23-3. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.
README
markdownAH1711-SA-7
Diodes Incorporated · Linear Hall Sensors · SOT-23-3
AH1711-SA-7 from Diodes Incorporated, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input. Operating range 2.4V to 5.5V; absolute maximum 6.0V. Recommend a 10nF-100nF bypass capacitor (CIN) close to the pin for power stabilization and noise immunity. |
| 2 | OUTPUT | output | Open-drain latch output. Pulled low (VOL ~0.2V at IOUT=20mA) when magnetic flux density exceeds Bop, and latched until flux reverses below Brp. Requires an external pull-up resistor RL; output off leakage <0.1µA typ; internal current limit IOCL 30-60mA. Absolute maximum VOUT_off = 6.0V; IOUT max = 60mA. |
| 3 | GND | power_in | Ground reference for the device. Connect to system ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-23-3 |
| Category | Magnetic Sensors |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
AH1711-SA-7
CAD (KiCad official)
- Symbol:
AH1711-SA-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (None pp, sha256
a0df920c57f9e42e, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).