component
ADXL345BCCZ
Public Unreviewedby Ray
Analog Devices Accelerometers, LGA-14(3x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.
README
markdownADXL345BCCZ
Analog Devices · Accelerometers · LGA-14(3x5)
ADXL345BCCZ from Analog Devices, in a LGA-14(3x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD_I/O | power_in | Digital interface supply voltage. Range 1.7 V to VS; typically 1.8 V. Powers the I2C/SPI I/O buffers and sets the logic level of digital pins. |
| 2 | GND | power_in | Ground. Must be connected to ground. |
| 3 | RESERVED | passive | Reserved. Must be connected to VS or left open (not connected). |
| 4 | GND | power_in | Ground. Must be connected to ground. |
| 5 | GND | power_in | Ground. Must be connected to ground. |
| 6 | VS | power_in | Analog/core supply voltage. Range 2.0 V to 3.6 V; typically 2.5 V. Main supply for the accelerometer sensor and analog front-end. |
| 7 | CS | input | Chip select (active low). Tie high (to VDD_I/O) to select I2C mode; drive from an SPI master to select SPI mode. Includes the interface-mode selector between I2C and SPI. |
| 8 | INT1 | output | Interrupt 1 output. Programmable interrupt (tap, activity/inactivity, free-fall, data ready, watermark, overrun) whose polarity is configurable via the DATA_FORMAT register. |
| 9 | INT2 | output | Interrupt 2 output. Second programmable interrupt channel; any of the same events can be routed here via the INT_MAP register. |
| 10 | NC | unconnected | No internal connection. Leave open or tie to ground for mechanical support. |
| 11 | RESERVED | passive | Reserved. Must be connected to ground or left open (not connected). |
| 12 | SDO/ALT_ADDRESS | bidirectional | In SPI 4-wire mode this is the serial data output (SDO). In I2C mode this pin selects the alternate 7-bit I2C address (tie low for 0x53, tie high for 0x1D). |
| 13 | SDA/SDI/SDIO | bidirectional | Serial data. In I2C mode this is SDA (open-drain, bidirectional). In SPI 4-wire mode this is SDI (data in to the ADXL345). In SPI 3-wire mode this pin is the bidirectional SDIO. |
| 14 | SCL/SCLK | input | Serial communications clock. SCL in I2C mode, SCLK in SPI mode. Also functions as an I2C/SPI protocol clock line shared across the two interfaces. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | LGA-14(3x5) |
| Category | Sensors |
| Pins | 14 |
Ordering variants
Same part, different packaging or reel option.
ADXL345BCCZADXL345BCCZ-RLADXL345BCCZ-RL7
CAD (KiCad official)
- Symbol:
ADXL345BCCZ - Footprint:
Package_LGA:LGA-14_3x5mm_P0.8mm_LayoutBorder1x6y - 3D model: LGA-14(3x5) (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (40 pp, sha256
230a78d03d36a94d, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).