AD8515ARTZ from UMW, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT	output	Amplifier output. Rail-to-rail output swing; can source/sink up to ~20 mA short-circuit and drives loads down to VOL of 10 mV (IL=100 µA) or 30 mV (IL=750 µA) from either rail.
2	V-	power_in	Negative supply rail. Typically tied to GND for single-supply operation from 1.8 V to 5 V (V+ - V- ≤ 6 V absolute max).
3	+IN	input	Non-inverting input. Rail-to-rail common-mode input range 0 V to VS. Typical input bias current 2 pA, typical input offset 1 mV (6 mV max).
4	-IN	input	Inverting input. Rail-to-rail common-mode input range 0 V to VS. Absolute maximum differential input voltage ±6 V or ±VS.
5	V+	power_in	Positive supply rail. 1.8 V to 5 V single-supply operation; 6 V absolute maximum supply voltage. Draws 325 µA typical (450 µA max) supply current at VS = 1.8 V.

Key specifications

Parameter	Value
Manufacturer	UMW
Package	SOT-23-5
Category	Op-amp/Cmp
Pins	5

Ordering variants

AD8515ARTZ
AD8515ARTZAKSZ

CAD (KiCad official)

Symbol: AD8515ARTZ
Footprint: Package_TO_SOT_SMD:SOT-23-5
3D model: SOT-23-5 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`ad8515artz.step`	85 KB	You want the bare part, or you mark your own boards.
`ad8515artz-etched.step`	1.8 MB	You want the part with `AD8515ARTZ` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 452 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: UMW datasheet (17 pp, sha256 2236e369ec28e028, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF