Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

main

Generated by kicad-footprint-generator · KiCad file format 20260206

Name	Last commit message	Last updated
docs	ad8515artz: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray	1mo ago
viewers	pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray	2mo ago
ad8515artz-etched.fit.json	ad8515artz: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray	1mo ago
ad8515artz-etched.glb	ad8515artz: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray	16d ago
ad8515artz-etched.step	ad8515artz: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray	16d ago
ad8515artz.glb	Publish 0.1.0 · Ray	2mo ago
ad8515artz.kicad_mod	Publish 0.1.0 · Ray	2mo ago
ad8515artz.kicad_sym	Publish 0.1.0 · Ray	2mo ago
ad8515artz.lbr	rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray	2mo ago
ad8515artz.step	Publish 0.1.0 · Ray	2mo ago
package.json	Publish 0.2.0 · Ray	2mo ago
pads.json	pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray	2mo ago
page.json	ad8515artz: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray	16d ago
README.md	ad8515artz: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray	1mo ago

AD8515ARTZ

UMW · Operational Amplifier · SOT-23-5

AD8515ARTZ from UMW, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT	output	Amplifier output. Rail-to-rail output swing; can source/sink up to ~20 mA short-circuit and drives loads down to VOL of 10 mV (IL=100 µA) or 30 mV (IL=750 µA) from either rail.
2	V-	power_in	Negative supply rail. Typically tied to GND for single-supply operation from 1.8 V to 5 V (V+ - V- ≤ 6 V absolute max).
3	+IN	input	Non-inverting input. Rail-to-rail common-mode input range 0 V to VS. Typical input bias current 2 pA, typical input offset 1 mV (6 mV max).
4	-IN	input	Inverting input. Rail-to-rail common-mode input range 0 V to VS. Absolute maximum differential input voltage ±6 V or ±VS.
5	V+	power_in	Positive supply rail. 1.8 V to 5 V single-supply operation; 6 V absolute maximum supply voltage. Draws 325 µA typical (450 µA max) supply current at VS = 1.8 V.

Key specifications

Parameter	Value
Manufacturer	UMW
Package	SOT-23-5
Category	Op-amp/Cmp
Pins	5

Ordering variants

AD8515ARTZ
AD8515ARTZAKSZ

CAD (KiCad official)

Symbol: AD8515ARTZ
Footprint: Package_TO_SOT_SMD:SOT-23-5
3D model: SOT-23-5 (KiCad packages3D, STEP)
3D model files: ad8515artz-etched.step / ad8515artz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad8515artz.step / ad8515artz.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`ad8515artz.step`	85 KB	You want the bare part, or you mark your own boards.
`ad8515artz-etched.step`	1.8 MB	You want the part with `AD8515ARTZ` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 452 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: UMW datasheet (17 pp, sha256 2236e369ec28e028, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF