Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗

Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗

Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗

Loads on click. Unloads when scrolled away or the tab is hidden.

Datasheet

Open in new tab ↗

Loads on click. Unloads when scrolled away or the tab is hidden.

Download PDF

Contents

Pinout
Key specifications
Ordering variants
CAD (KiCad official)
Provenance

README

markdown

AD8302ARUZ-RL7

Analog Devices · RF Detectors · TSSOP-14

AD8302ARUZ-RL7 from Analog Devices, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	COMM	power_in	Device common. Connect to low-impedance ground. Pins 1 and 7 are internally the same net and both must be tied to ground.
2	INPA	input	High-impedance RF/IF input to channel A. Must be ac-coupled. Input impedance ~3 kΩ∥2 pF; usable input range −73 dBV to −13 dBV (about −60 dBm to 0 dBm in a 50 Ω system) up to 2.7 GHz.
3	OFSA	passive	Channel-A offset compensation filter pin. A capacitor from this pin to COMM sets the offset-compensation high-pass corner and provides input decoupling for the channel-A log amp.
4	VPOS	power_in	Positive supply pin (V_S). Operating range 2.7 V to 5.5 V; typical quiescent current 19 mA at 5 V. Decouple locally to COMM.
5	OFSB	passive	Channel-B offset compensation filter pin. A capacitor from this pin to COMM sets the offset-compensation high-pass corner and provides input decoupling for the channel-B log amp.
6	INPB	input	High-impedance RF/IF input to channel B. Same structure as INPA; must be ac-coupled. Typically driven by the reference signal in gain-measurement configurations.
7	COMM	power_in	Device common. Second ground pin, internally tied to pin 1. Connect to low-impedance ground.
8	PFLT	passive	Low-pass filter terminal for the phase output. An external capacitor to COMM lowers the phase-output envelope bandwidth (default 30 MHz) for noise averaging.
9	VPHS	output	Single-ended analog phase output. Voltage is proportional to the phase difference between INPA and INPB with a slope of ~10 mV/°; swings 30 mV to 1.8 V over 180° to 0°. Can source/sink 8 mA.
10	PSET	input	Phase setpoint / feedback pin. In measurement mode tie to VPHS to scale the phase output; in controller mode drive with a set-point voltage to force a target phase.
11	VREF	output	Internally generated 1.8 V reference output (1.7 V to 1.9 V into 2 kΩ). Can source about 5 mA and is useful for offsetting or biasing the MSET/PSET pins.
12	MSET	input	Magnitude setpoint / feedback pin. In measurement mode tie to VMAG to scale the gain output; in controller mode drive with a set-point voltage to force a target gain/loss.
13	VMAG	output	Single-ended analog magnitude output. Voltage is proportional to the decibel ratio of the signals at INPA and INPB with a slope of ~30 mV/dB, swinging 30 mV to 1.8 V over a ±30 dB range. Can source/sink 8 mA.
14	MFLT	passive	Low-pass filter terminal for the magnitude output. An external capacitor to COMM lowers the magnitude-output envelope bandwidth (default 30 MHz) for noise averaging.

Key specifications

Parameter	Value
Manufacturer	Analog Devices
Package	TSSOP-14
Category	RF And Wireless
Pins	14

Ordering variants

Same part, different packaging or reel option.

AD8302ARUZ-RL7

CAD (KiCad official)

Symbol: AD8302ARUZ-RL7
Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
3D model: TSSOP-14 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Analog Devices datasheet (23 pp, sha256 cd52c37aedc30168, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF