component
AD5165BUJZ100-R7
Public Unreviewedby Ray
Analog Devices Digital Potentiometers, TSOT-23-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.
README
markdownAD5165BUJZ100-R7
Analog Devices · Digital Potentiometers · TSOT-23-8
AD5165BUJZ100-R7 from Analog Devices, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | W | passive | Wiper terminal of the 100 kΩ digital potentiometer. Terminal voltage must satisfy GND ≤ V_W ≤ V_DD. Typical wiper resistance is 50-85 Ω (150 Ω max). |
| 2 | VDD | power_in | Positive power supply, 2.7 V to 5.5 V. Absolute maximum -0.3 V to +7 V referenced to GND. Bypass locally with a decoupling capacitor. |
| 3 | GND | power_in | Digital ground / device common return. |
| 4 | CLK | input | Serial clock input for the 3-wire interface, positive-edge triggered. Maximum clock rate 25 MHz; V_IH ≥ 1.8 V, V_IL ≤ 0.6 V. |
| 5 | SDI | input | Serial data input for the 3-wire interface. The 8-bit wiper code is shifted in MSB first, clocked on the rising edge of CLK. |
| 6 | CS | input | Chip select input, active high (inverted vs. the pin-compatible AD5160). When CS returns low after the shift is complete, the shifted 8-bit code is transferred into the wiper register. |
| 7 | B | passive | B terminal of the 100 kΩ end-to-end resistor. Terminal voltage must satisfy GND ≤ V_B ≤ V_DD; may be biased above or below the A terminal (no polarity restriction). |
| 8 | A | passive | A terminal of the 100 kΩ end-to-end resistor. Terminal voltage must satisfy GND ≤ V_A ≤ V_DD; may be biased above or below the B terminal (no polarity restriction). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-8 |
| Category | Data Acquisition |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
AD5165BUJZ100-R7AD5165BUJZ100-RL7
CAD (KiCad official)
- Symbol:
AD5165BUJZ100-R7 - Footprint:
Package_TO_SOT_SMD:SOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
c734dc09ef844d8c, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).