74LVC1G17W5-7 from Diodes Incorporated, in a SOT-25-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	NC	unconnected	No internal connection. May be left floating or tied to VCC/GND.
2	A	input	Schmitt-trigger data input. Accepts up to 5.5 V regardless of VCC (5.5 V-tolerant). Typical hysteresis 0.35 V at VCC = 3 V (VT+ ~1.5-2.0 V, VT- ~0.8-1.3 V).
3	GND	power_in	Ground reference (0 V).
4	Y	output	Push-pull buffered data output. Y = A. Drives ±24 mA at VCC = 3 V (up to ±32 mA at 4.5 V).
5	VCC	power_in	Positive supply voltage, 1.65 V to 5.5 V operating range (1.5 V data-retention minimum). Absolute max 6.5 V. Typical ICC ≤ 10 µA.

Key specifications

Parameter	Value
Manufacturer	Diodes Incorporated
Package	SOT-25-5
Category	Logic
Pins	5

Ordering variants

74LVC1G17W5-7
74LVC1G17W5-7SE-7
74LVC1G17W5-7Z-7
74LVC1G17W5-7FS3-7
74LVC1G17W5-7FW4-7
74LVC1G17W5-7FX4-7
74LVC1G17W5-7FZ4-7

CAD (KiCad official)

Symbol: 74LVC1G17W5-7
Footprint: Package_TO_SOT_SMD:SOT-23-5
3D model: SOT-25-5 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`74lvc1g17w5-7.step`	85 KB	You want the bare part, or you mark your own boards.
`74lvc1g17w5-7-etched.step`	1.6 MB	You want the part with `74LVC1G17W5-7` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 427 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Diodes Incorporated datasheet (18 pp, sha256 029f345a1e7be917, retrieved 2026-08-17, tier: manufacturer)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF