component
74LVC1G11DW-7
Public Unreviewedby Ray
Diodes Incorporated Gates, SOT-363. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdown74LVC1G11DW-7
Diodes Incorporated · Gates · SOT-363
74LVC1G11DW-7 from Diodes Incorporated, in a SOT-363. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A | input | Data input A of the 3-input AND gate. Accepts logic levels up to 5.5V independent of VCC (VCC 1.65V-5.5V). VIH/VIL thresholds vary with VCC (e.g. 0.7VCC / 0.3VCC at VCC=4.5-5.5V). |
| 2 | GND | power_in | Ground reference (0V) for the device. |
| 3 | B | input | Data input B of the 3-input AND gate. 5.5V-tolerant input; thresholds scale with VCC. |
| 4 | Y | output | Data output of the 3-input AND gate (Y = A * B * C). Push-pull CMOS output with +/-24mA drive at VCC=3V (up to +/-32mA at VCC=4.5V). |
| 5 | VCC | power_in | Positive supply voltage, 1.65V to 5.5V operating (1.5V data-retention). Typical ICC <= 10 uA at 25 C. Decouple with a 100 nF capacitor to GND close to the pin. |
| 6 | C | input | Data input C of the 3-input AND gate. 5.5V-tolerant input; thresholds scale with VCC. Unused inputs must be tied to VCC or GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-363 |
| Category | Logic |
| Pins | 6 |
Ordering variants
74LVC1G11DW-774LVC1G11DW-7W6-774LVC1G11DW-7FZ4-774LVC1G11DW-7FW4-7
CAD (KiCad official)
- Symbol:
74LVC1G11DW-7 - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SOT-363 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
74lvc1g11dw-7.step |
99 KB | You want the bare part, or you mark your own boards. |
74lvc1g11dw-7-etched.step |
1.6 MB | You want the part with 74LVC1G11DW-7 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 436 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (12 pp, sha256
f80971eb32dfb18a, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).