3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownISL60002BIH325Z-T7A
RENESAS · Voltage References · SOT-23-3
ISL60002BIH325Z-T7A from RENESAS, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power supply input; 2.7V to 5.5V for the ISL60002-25, with absolute maximum of -0.5V to +6.5V relative to GND. |
| 2 | VOUT | output | Voltage reference output (2.500V for the ISL60002-25), able to source and sink up to 7mA. |
| 3 | GND | power_in | Ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOT-23-3 |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VOUT Accuracy ISL60002B25 | VOA | -1 | 1 | mV | TA = +25°C | 7 | |
| Input Voltage Range | VIN | 2.7 | 5.5 | V | 7 | ||
| Supply Current | IIN | 350 | 900 | nA | 9 | ||
| Line Regulation | ΔVOUT/ΔVIN | 80 | 250 | µV/V | +2.7V ≤ VIN ≤ +5.5V | 9 | |
| Load Regulation (source) | ΔVOUT/ΔIOUT | 25 | 100 | µV/mA | 0mA ≤ ISOURCE ≤ 7mA | 9 | |
| Load Regulation (sink) | ΔVOUT/ΔIOUT | 50 | 150 | µV/mA | -7mA ≤ ISINK ≤ 0mA | 9 | |
| Output Voltage Temperature Coefficient | TC VOUT | 20 | ppm/°C | Across the specified temperature range (box method) | 9 | ||
| Output Voltage | VOUT | 2.5 | V | VIN = 3.0V, IOUT = 0mA | 7 | ||
| Thermal Hysteresis | ΔVOUT/ΔTA | 100 | ppm | ΔTA = +125°C | 9 | ||
| Long Term Stability | ΔVOUT/Δt | 50 | ppm | TA = +25°C; first 1khrs | 9 | ||
| Short-Circuit Current (to GND) | ISC | 50 | mA | TA = +25°C | 9 | ||
| Output Voltage Noise | VN | 30 | µVP-P | 0.1Hz ≤ f ≤ 10Hz | 9 | ||
| Maximum Voltage VIN to GND | VIN | -0.5 | 6.5 | V | 5 | ||
| Maximum Voltage VOUT to GND (10s) | VOUT | -0.5 | 1 | V | upper limit printed as +VOUT + 1V; 10s | 5 | |
| ESD Human Body Model | 5.5 | kV | 5 | ||||
| ESD Machine Model | 550 | V | 5 | ||||
| ESD Charged Device Model | 2 | kV | 5 | ||||
| Maximum Junction Temperature (Plastic Package) | 107 | °C | 5 | ||||
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| X-Ray Exposure | 10 | mRem | Note 6 | 5 | |||
| Operating Temperature Range (Industrial) | -40 | 85 | °C | 5 | |||
| Thermal Resistance Junction to Ambient | θJA | 275 | °C/W | 3 Ld SOT-23 | 5 | ||
| Thermal Resistance Junction to Case | θJC | 110 | °C/W | 3 Ld SOT-23 | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | Jan 14, 2019 23.00 Page 1 Features - corrected ESD rating listed as 5.5V (Human Body Model) to 5.5kV. Changed the ESD HBM in Abs Max section on page 5 from 5500V to 5.5kV. | 38 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ISL60002BIH325Z-T7A - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.0 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
isl60002bih325z-t7a-etched.step/isl60002bih325z-t7a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl60002bih325z-t7a.step/isl60002bih325z-t7a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (40 pp, sha256
7624b5f1613c5f4d, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).