component
TP6001-TR
Public Made by Adomby adom
3PEAK Operational Amplifier, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTP6001-TR
3PEAK · Operational Amplifier · SOT-23-5
TP6001-TR from 3PEAK, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output, which swings to within 10mV of either rail and delivers over 100mA of output drive current, with the output not to be forced more than 0.5V beyond either supply. |
| 2 | -VS | power_in | Negative power supply (V-) pin; the supply runs from 2.1V to 6.0V total (+VS to -VS, 7V absolute maximum), and the input common-mode range extends to (V-) - 0.1 V. |
| 3 | +IN | input | Non-inverting input whose common-mode voltage range is (V-) - 0.1 V to (V+) + 0.1 V, and which may exceed the supply by 300mV with input current limited to less than 10mA. |
| 4 | -IN | input | Inverting input with the same common-mode range of (V-) - 0.1 V to (V+) + 0.1 V, and input current limited to less than 10mA if the input extends more than 300mV beyond the supply. |
| 5 | +VS | power_in | Positive power supply (V+) pin; the supply runs from 2.1V to 6.0V total with a 7V absolute maximum between +VS and -VS. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 3PEAK |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VS | 2.1 | 6 | V | 5 | ||
| Input Offset Voltage | VOS | -3 | 0.5 | 3 | mV | VCM = 0V to 3V | 5 |
| Open-loop Voltage Gain | Av | 85 | 110 | dB | RLOAD = 10kΩ | 5 | |
| Common-mode Input Voltage Range (min referenced to (V-), max referenced to (V+)) | VCMR | -0.1 | 0.1 | V | 5 | ||
| Power Supply Rejection Ratio | PSRR | 80 | 100 | dB | 5 | ||
| Common Mode Rejection Ratio | CMRR | 70 | 100 | dB | VCM = 0V to 3V | 5 | |
| Maximum Output Voltage Swing | VOH, VOL | 3 | 15 | mV | RLOAD = 10kΩ | 5 | |
| Quiescent Current per Amplifier | IQ | 80 | 130 | μA | 5 | ||
| Offset Voltage Drift | VOS TC | 2 | μV/°C | TA = -40°C to 125°C | 5 | ||
| Input Bias Current | IB | 1 | pA | TA = 25 °C | 5 | ||
| Input Bias Current | IB | 25 | pA | TA = 85 °C | 5 | ||
| Input Offset Current | IOS | 1 | pA | 5 | |||
| Input Capacitance | CIN | 8 | pF | Differential Mode | 5 | ||
| Input Capacitance | CIN | 7 | pF | Common Mode | 5 | ||
| Channel Separation | Xtalk | 110 | dB | f = 1kHz, RL = 2kΩ | 5 | ||
| Output Short-Circuit Current | ISC | 100 | mA | 5 | |||
| Gain-Bandwidth Product | GBW | 1 | MHz | 5 | |||
| Slew Rate | SR | 0.7 | V/μs | AV = 1, VOUT = 1.5V to 3.5V, CLOAD = 60pF, RLOAD = 1kΩ | 5 | ||
| Settling Time, 0.1% | tS | 3.5 | μs | AV = 1, 2V Step, CLOAD = 60pF, RLOAD = 1kΩ | 5 | ||
| Settling Time, 0.01% | tS | 4.8 | μs | 5 | |||
| Phase Margin | PM | 60 | ° | RLOAD = 1kΩ, CLOAD = 60pF | 5 | ||
| Gain Margin | GM | 15 | dB | RLOAD = 1kΩ, CLOAD = 60pF | 5 | ||
| Input Voltage Noise (0.1 Hz to 10 Hz) | EN | 8 | μVPP | f = 0.1Hz to 10Hz | 5 | ||
| Input Voltage Noise Density | eN | 27 | nV/√Hz | f = 1kHz | 5 | ||
| Input Current Noise | iN | 2 | fA/√Hz | f = 1kHz | 5 | ||
| Total Harmonic Distortion and Noise | THD+N | 0.003 | % | f = 1kHz, AV =1, RL = 2kΩ, VOUT = 1Vp-p | 5 | ||
| Supply Voltage, (+VS)-(-VS) | 7 | V | 4 | ||||
| Input Voltage (referenced to (-VS) and (+VS) respectively) | -0.3 | 0.3 | V | min referenced to (-VS); max referenced to (+VS) | 4 | ||
| Differential Input Voltage | -7 | 7 | V | 4 | |||
| Input Current, +IN, -IN | -10 | 10 | mA | Note 2 | 4 | ||
| Operating Temperature Range | -40 | 125 | °C | 4 | |||
| Maximum Junction Temperature | 150 | °C | 4 | ||||
| Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Lead Temperature (Soldering) | 260 | °C | 10 sec | 4 | |||
| ESD Human Body Model (minimum level) | HBM | 8 | kV | MIL-STD-883H Method 3015.8 | 4 | ||
| ESD Charged Device Model (minimum level) | CDM | 2 | kV | JEDEC-EIA/JESD22-C101E | 4 | ||
| Thermal Resistance, Junction-to-Ambient (5-Pin SOT23) | θJA | 250 | °C/W | 5-Pin SOT23 | 4 | ||
| Thermal Resistance, Junction-to-Case (5-Pin SOT23) | θJC | 81 | °C/W | 5-Pin SOT23 | 4 |
CAD (KiCad official)
- Symbol:
TP6001-TR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
tp6001-tr-etched.step/tp6001-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tp6001-tr.step/tp6001-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: 3PEAK datasheet (17 pp, sha256
b5847dbd06879aca, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).