component
RC4136N
Public Made by Adomby adom
Texas Instruments Operational Amplifier, PDIP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRC4136N
Texas Instruments · Operational Amplifier · PDIP-14
RC4136N from Texas Instruments, in a PDIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1IN- | input | Inverting input of amplifier 1; its magnitude must never exceed the supply voltage magnitude or 15 V, whichever is less, and the differential input voltage is limited to ±30 V. |
| 2 | 1IN+ | input | Non-inverting input of amplifier 1; its magnitude must never exceed the supply voltage magnitude or 15 V, whichever is less, and the differential input voltage is limited to ±30 V. |
| 3 | 1OUT | output | Output of amplifier 1, which is short-circuit protected with the output shorted to ground for an unlimited duration (one amplifier at a time). |
| 4 | 2OUT | output | Output of amplifier 2, which is short-circuit protected with the output shorted to ground for an unlimited duration (one amplifier at a time). |
| 5 | 2IN+ | input | Non-inverting input of amplifier 2; its magnitude must never exceed the supply voltage magnitude or 15 V, whichever is less, and the differential input voltage is limited to ±30 V. |
| 6 | 2IN- | input | Inverting input of amplifier 2; its magnitude must never exceed the supply voltage magnitude or 15 V, whichever is less, and the differential input voltage is limited to ±30 V. |
| 7 | VCC- | power_in | Negative supply, recommended −5 V to −15 V, with an absolute maximum of −18 V for the RC4136. |
| 8 | 3IN- | input | Inverting input of amplifier 3; its magnitude must never exceed the supply voltage magnitude or 15 V, whichever is less, and the differential input voltage is limited to ±30 V. |
| 9 | 3IN+ | input | Non-inverting input of amplifier 3; its magnitude must never exceed the supply voltage magnitude or 15 V, whichever is less, and the differential input voltage is limited to ±30 V. |
| 10 | 3OUT | output | Output of amplifier 3, which is short-circuit protected with the output shorted to ground for an unlimited duration (one amplifier at a time). |
| 11 | VCC+ | power_in | Positive supply, recommended 5 V to 15 V, with an absolute maximum of 18 V for the RC4136. |
| 12 | 4OUT | output | Output of amplifier 4, which is short-circuit protected with the output shorted to ground for an unlimited duration (one amplifier at a time). |
| 13 | 4IN+ | input | Non-inverting input of amplifier 4; its magnitude must never exceed the supply voltage magnitude or 15 V, whichever is less, and the differential input voltage is limited to ±30 V. |
| 14 | 4IN- | input | Inverting input of amplifier 4; its magnitude must never exceed the supply voltage magnitude or 15 V, whichever is less, and the differential input voltage is limited to ±30 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 0.5 | 6 | mV | VO = 0, 25°C | 3 | |
| Input offset voltage (full range) | VIO | 7.5 | mV | VO = 0, full range | 3 | ||
| Input offset current | IIO | 5 | 200 | nA | VO = 0, 25°C | 3 | |
| Input offset current (full range) | IIO | 300 | nA | VO = 0, full range | 3 | ||
| Input bias current | IIB | 140 | 500 | nA | VO = 0, 25°C | 3 | |
| Input bias current (full range) | IIB | 800 | nA | VO = 0, full range | 3 | ||
| Input voltage range | Vi | -12 | 14 | V | 25°C | 3 | |
| Maximum peak output voltage swing | VOM | -12 | 14 | V | RL = 10 kΩ, 25°C | 3 | |
| Maximum peak output voltage swing | VOM | -10 | 13 | V | RL = 2 kΩ, 25°C | 3 | |
| Maximum peak output voltage swing (full range) | VOM | -10 | V | RL ≥ 2 kΩ, full range | 3 | ||
| Large-signal differential voltage amplification | AVD | 20 | 300 | V/mV | VO = ±10 V, 25°C | 3 | |
| Large-signal differential voltage amplification (full range) | AVD | 15 | V/mV | VO = ±10 V, RL ≥ 2 kΩ, full range | 3 | ||
| Common-mode rejection ratio | CMRR | 70 | 90 | dB | VO = 0, RS = 50 Ω, 25°C | 3 | |
| Supply-voltage sensitivity | kSVS | 30 | 150 | µV/V | VCC = ±9 V to ±15 V, VO = 0, 25°C | 3 | |
| Supply current (all four amplifiers) | ICC | 5 | 11.3 | mA | VO = 0, No load, 25°C | 3 | |
| Supply current (all four amplifiers), MIN TA | ICC | 6 | 13.7 | mA | VO = 0, No load, MIN TA (0°C) | 3 | |
| Supply current (all four amplifiers), MAX TA | ICC | 4.5 | 10 | mA | VO = 0, No load, MAX TA (70°C) | 3 | |
| Total power dissipation (all four amplifiers) | PD | 150 | 340 | mW | VO = 0, No load, 25°C | 3 | |
| Total power dissipation (all four amplifiers), MIN TA | PD | 180 | 400 | mW | VO = 0, No load, MIN TA (0°C) | 3 | |
| Total power dissipation (all four amplifiers), MAX TA | PD | 135 | 300 | mW | VO = 0, No load, MAX TA (70°C) | 3 | |
| Unity-gain bandwidth | B1 | 3 | MHz | 25°C | 3 | ||
| Input resistance | ri | 0.3 | 5 | MΩ | 25°C; not production tested | 3 | |
| Equivalent input noise voltage (closed loop) | Vn | 8 | nV√Hz | AVD = 100, BW = 1 Hz, f = 1 kHz, RS = 100 Ω, 25°C | 3 | ||
| Crosstalk attenuation | (VO1/VO2) | 105 | dB | AVD = 100, f = 10 kHz, RS = 1 kΩ, 25°C | 3 | ||
| Rise time | tr | 0.13 | µs | VI = 20 mV, CL = 100 pF, RL = 2 kΩ, 25°C | 4 | ||
| Overshoot factor | 5 | % | VI = 20 mV, CL = 100 pF, RL = 2 kΩ, 25°C | 4 | |||
| Slew rate at unity gain | SR | 17 | V/µs | VI = 10 V, CL = 100 pF, RL = 2 kΩ, 25°C | 4 | ||
| Supply voltage VCC+ | VCC+ | 5 | 15 | V | 3 | ||
| Supply voltage VCC- | VCC- | -5 | -15 | V | 3 | ||
| Operating free-air temperature range (RC4136) | TA | 0 | 70 | °C | Characterized operating range for RC4136 | 1 | |
| Supply voltage VCC+ (RC4136 and RV4136) | VCC+ | 18 | V | 2 | |||
| Supply voltage VCC- (RC4136 and RV4136) | VCC- | -18 | V | 2 | |||
| Differential input voltage | VID | -30 | 30 | V | See Note 2 | 2 | |
| Input voltage (any input) | VI | -15 | 15 | V | See Notes 1 and 3 | 2 | |
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Lead temperature (D or N package) | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 2 | |||
| Package thermal impedance, junction-to-ambient (N package) | θJA | 80 | °C/W | N package, per JESD 51-7 | 2 |
CAD (KiCad official)
- Symbol:
RC4136N - Footprint:
Package_DIP:DIP-14_W7.62mm - 3D model: PDIP-14 (KiCad packages3D, STEP)
- 3D model files:
rc4136n-etched.step/rc4136n-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rc4136n.step/rc4136n.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (8 pp, sha256
4b427a1a26741f40, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).