3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLPB1003B5F
LOWPOWER · Battery Management ICs · SOT-23-5
LPB1003B5F from LOWPOWER, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin; connect the negative terminal of the battery to this pin. |
| 2 | GND | power_in | Ground pin; connect the negative terminal of the battery to this pin. |
| 3 | VDD | power_in | Power supply pin; the absolute maximum rating for VDD to GND is -0.3V to 10V. |
| 4 | VM | passive | Negative terminal of the battery pack; the internal FET switch connects this terminal to GND, with VM to GND limited to VDD-6V to VDD+0.3V. |
| 5 | VM | passive | Negative terminal of the battery pack; the internal FET switch connects this terminal to GND, with VM to GND limited to VDD-6V to VDD+0.3V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD to GND | -0.3 | 10 | V | 3 | |||
| Operating ambient temperature | -40 | 85 | ℃ | 3 | |||
| Storage temperature | -55 | 125 | ℃ | 3 | |||
| Operating current | IDD | 3.5 | 6 | uA | VDD=3.7V | 4 | |
| Overcharge detection voltage | VOCP | 4.25 | 4.3 | 4.35 | V | 4 | |
| Overcharge release voltage | VOCR | 4.05 | 4.1 | 4.15 | V | 4 | |
| Overdischarge detection voltage | VODP | 2.3 | 2.4 | 2.5 | V | 4 | |
| Overdischarge release voltage | VODR | 2.88 | 3 | 3.12 | V | 4 | |
| Over discharge current detection voltage | VOI | 0.12 | 0.15 | 0.18 | V | 4 | |
| Overcharge current detection voltage | VCI | -0.18 | -0.15 | -0.12 | V | 4 | |
| Short circuit current detection voltage | VSHORT | 0.5 | 0.8 | 1.1 | V | VDD=3.6V | 4 |
| Overcharge detection delay time | TOC | 20 | 40 | 60 | ms | VDD=3.6V~4.4V | 4 |
| Overdischarge detection delay time | TOD | 15 | 30 | 50 | ms | VDD=3.6V~2.0V | 4 |
| Overcurrent detection delay time | TOI | 2 | 6 | 11 | ms | VDD=3.6V | 4 |
| Short circuit current detection delay time | TSHORT | 100 | 250 | 400 | us | VDD=3.6V | 4 |
| Stand-by current | IPD | 2.2 | uA | VDD=2.4V | 4 | ||
| MOS transistor on-resistance | RDS(ON) | 50 | mΩ | VDD=3.7V,ID=1.0A | 4 | ||
| Continuous load current | 3 | A | VDD=3.7V | 4 | |||
| Over temperature protection | 155 | ℃ | 4 | ||||
| Over temperature protection recovery | 120 | ℃ | 4 | ||||
| Charger voltage (0V charging) | 1.2 | V | 4 |
CAD (KiCad official)
- Symbol:
LPB1003B5F - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.1 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lpb1003b5f-etched.step/lpb1003b5f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lpb1003b5f.step/lpb1003b5f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (8 pp, sha256
1b9575ccb4172522, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).