component
LM2832ZMY
Public Made by Adomby adom
Texas Instruments DC-DC Converters, MSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2832ZMY
Texas Instruments · DC-DC Converters · MSOP-8-EP
LM2832ZMY from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIND | power_in | Power input supply pin for the regulator; the operating input range is 3V to 5.5V. |
| 2 | VINA | power_in | Control circuitry supply voltage; connect VINA to VIND on the PC board. |
| 3 | GND | power_in | Signal and power ground; place the bottom resistor of the feedback network as close as possible to this pin. |
| 4 | EN | input | Enable control input where logic high enables operation; do not let this pin float or allow it to exceed VIN + 0.3V. |
| 5 | GND | power_in | Signal and power ground; place the bottom resistor of the feedback network as close as possible to this pin. |
| 6 | FB | input | Feedback pin; connect to an external resistor divider to set the output voltage. |
| 7 | GND | power_in | Signal and power ground; place the bottom resistor of the feedback network as close as possible to this pin. |
| 8 | SW | output | Output switch; connect to the inductor and catch diode. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-8-EP |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
LM2832ZMY - Footprint:
Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm - 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
lm2832zmy-etched.step/lm2832zmy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2832zmy.step/lm2832zmy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
b6bbd4ba77876f15, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).