Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM95235DIMMX

Texas Instruments · Temperature Sensors · VSSOP-8-0.65mm

LM95235DIMMX from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Device power supply, 3.0 V to 3.6 V. Requires a 10 µF bypass capacitor in parallel with 0.1 µF and 100 pF, with the 100 pF placed closest to the pin. Typical supply current is 350 µA at a 1 Hz conversion rate.
2 D+ passive Positive analog input from the remote thermal diode (anode). Connects to the diode-connected transistor's base/collector (MMBT3904) or the D+ node of an on-die processor thermal diode. Route with D- as a tightly coupled differential pair; a 100 pF filter capacitor across D+/D- close to the LM95235 is recommended.
3 D- passive Negative analog input from the remote thermal diode (cathode/emitter). Provides the return path for the temperature-sensing bias currents; internally referenced but should not be tied directly to board ground - return to LM95235 GND through the analog input pair only.
4 T_CRIT output Critical-temperature comparator output. Open-drain, active-low; requires an external pull-up resistor (typ. 1.3 kΩ to 3.3 V). Asserted when either unmasked channel exceeds its programmed T_CRIT limit; typically used for system shutdown or fan control.
5 GND power_in Device ground reference for both digital and analog circuitry.
6 OS/A0 bidirectional Dual-function pin. Defaults after power-up as a three-level SMBus slave address input (A0): tie to VDD, GND, or to the mid-point of a resistor divider between VDD and GND to pick one of three slave addresses. When reprogrammed via the configuration register it becomes the OS (over-temperature shutdown) comparator output - active-low, open-drain, requiring an external pull-up.
7 SMBDAT bidirectional SMBus 2.0 serial data line (SMBus/I²C-compatible). Open-drain; requires an external pull-up resistor (typ. 1.3 kΩ to 3.3 V). Supports the SMBus TIMEOUT feature.
8 SMBCLK input SMBus 2.0 serial clock input (SMBus/I²C-compatible). Driven by the SMBus master; requires an external pull-up (typ. 1.3 kΩ to 3.3 V) on the bus.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8-0.65mm
Category Sensors
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LM95235DIMMX/NOPB
  • LM95235DIMM/NOPB
  • LM95235DIMMXCIMMX/NOPB
  • LM95235DIMMXCIMM/NOPB
  • LM95235DIMMXEIMM/NOPB
  • LM95235DIMMXQEIMM/NOPB

CAD (KiCad official)

  • Symbol: LM95235DIMMX
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
  • 3D model files: lm95235dimmx-etched.step / lm95235dimmx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm95235dimmx.step / lm95235dimmx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (None pp, sha256 5d83385b378f1386, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF