3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHCPL-063N-000E
Broadcom/AVAGO · Logic Output Optoisolators · SOIC-8
HCPL-063N-000E from Broadcom/AVAGO, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANODE 1 | input | LED anode of channel 1; drive with input current IF(H) of 3.0 to 10 mA (average max 10 mA). |
| 2 | CATHODE 1 | passive | LED cathode of channel 1; reverse input voltage must not exceed 3 V. |
| 3 | CATHODE 2 | passive | LED cathode of channel 2; reverse input voltage must not exceed 3 V. |
| 4 | ANODE 2 | input | LED anode of channel 2; drive with input current IF(H) of 3.0 to 10 mA (average max 10 mA). |
| 5 | GND | power_in | Output-side ground; a 0.1 µF bypass capacitor between pins 5 and 8 is required. |
| 6 | VO2 | output | Channel 2 open-collector Schottky-clamped output, low when LED is on; pull-up resistor 330 Ω to 4 kΩ, max 50 mA sink, max 7 V. |
| 7 | VO1 | output | Channel 1 open-collector Schottky-clamped output, low when LED is on; pull-up resistor 330 Ω to 4 kΩ, max 50 mA sink, max 7 V. |
| 8 | VCC | power_in | Supply voltage, 4.5 V to 5.5 V recommended (absolute max 7 V); bypass with 0.1 µF to pin 5. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom/AVAGO |
| Package | SOIC-8 |
| Category | Optoisolators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High Level Output Current | IOH | 3.1 | 100 | µA | VCC = 5.5 V, VO = 5.5 V, VF = 0.8 V, VE = 2.0 V | 8 | |
| Low Level Output Voltage (sinking) | VOL | 0.4 | 0.6 | V | VCC = 5.5 V, IOL = 13 mA, IF = 3.0 mA, VE = 2.0 V | 8 | |
| High Level Supply Current (dual channel) | ICCH | 9 | 15 | mA | VE = 0.5 V, VCC = 5.5 V; dual channel products | 8 | |
| Low Level Supply Current (dual channel) | ICCL | 12 | 21 | mA | VE = 0.5 V, VCC = 5.5 V; dual channel products | 8 | |
| Input Forward Voltage | VF | 1 | 1.3 | 1.6 | V | IF = 4 mA | 8 |
| Input Reverse Breakdown Voltage | BVR | 3 | 5 | V | IR = 100 µA | 8 | |
| Input Current Threshold High to Low | ITHL | 1.5 | 3 | mA | VCC = 5.5 V, VO = 0.6 V, IO > 13 mA (sinking) | 9 | |
| Propagation Delay Time to High Output Level | tPLH | 52 | 100 | ns | IF = 3.5 mA, VCC = 5.0 V, VE = Open | 9 | |
| Propagation Delay Time to Low Output Level | tPHL | 53 | 100 | ns | 9 | ||
| Pulse Width Distortion | PWD | 11 | 45 | ns | 9 | ||
| Propagation Delay Skew | tPSK | 60 | ns | 9 | |||
| Output High Level Common Mode Transient Immunity (HCPL-063N, Avago app circuit) | /CMH/ | 15 | 25 | kV/µs | Using Avago App Circuit | 9 | |
| Output Low Level Common Mode Transient Immunity (HCPL-063N, Avago app circuit) | /CML/ | 15 | 25 | kV/µs | Using Avago App Circuit | 9 | |
| Power Supply Voltage | VCC | 4.5 | 5.5 | V | 7 | ||
| Input Voltage, Low Level | VFL | -3 | 0.8 | V | 7 | ||
| Input Current, High Level | IFH | 3 | 10 | mA | 7 | ||
| Operating Temperature (recommended) | TA | -40 | 85 | °C | 7 | ||
| Storage Temperature | TS | -55 | 125 | °C | 7 | ||
| Operating Temperature (absolute maximum) | TA | -40 | 85 | °C | 7 | ||
| Average Input Current | IF(AVG) | 10 | mA | Note 1 (peaking circuits up to 30 mA, 50 ns max pulse width, average not exceeding 10 mA) | 7 | ||
| Reverse Input Voltage | VR | 3 | V | 7 | |||
| Supply Voltage | VCC | -0.5 | 7 | V | Note 2 (1 minute maximum) | 7 | |
| Output Collector Current (each channel) | IO | 50 | mA | 7 | |||
| Output Power Dissipation (each channel) | PO | 60 | mW | Note 3 (derate linearly above 80 °C at 2.7 mW/°C for SOIC-8) | 7 | ||
| Output Voltage (each channel) | VO | -0.5 | 7 | V | 7 |
CAD (KiCad official)
- Symbol:
HCPL-063N-000E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
hcpl-063n-000e-etched.step/hcpl-063n-000e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hcpl-063n-000e.step/hcpl-063n-000e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom/AVAGO datasheet (17 pp, sha256
460225edc3ae93bc, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).