3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLD1117AG-50-AA3-A-R
UTC Unisonic Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223
LD1117AG-50-AA3-A-R from UTC Unisonic Tech, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND/ADJ | input | GND/ADJ |
| 2 | VOUT | power_out | Regulated 5.0V output (2.940V min / 3.000V typ / 3.060V max... actually 5.0V nominal for -50 suffix). Output current up to 1.0A (LD1117A). Requires an output capacitor (MLCC supported) for stability. KiCad's SOT-223-3_TabPin2 joins the tab to this pad (the sheet does not name the tab; TabPin2 joins it to pad 2). |
| 3 | VIN | power_in | Unregulated input supply. Absolute max 18V, recommended operation up to 15V. For 5.0V output at 1A the input must be at least ~6.2V (dropout 1.20V typ / 1.30V max at 1A). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UTC Unisonic Tech |
| Package | SOT-223 |
| Category | PMIC |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 4.9 | 5 | 5.1 | V | VIN=7V, IOUT=10mA, TJ=25°C | 9 |
| Line Regulation | VOUT | 1 | 10 | mV | VIN=6.5 to 15V, IOUT=0mA | 9 | |
| Load Regulation | VOUT | 1 | 15 | mV | VIN=6.5V; LD1117A: IOUT=0~1000mA | 9 | |
| Quiescent Current | IQ | 5 | 10 | mA | VIN15V | 9 | |
| Supply Voltage Rejection | SVR | 60 | 75 | dB | IOUT=40mA, f=120Hz, TJ=25°C, VIN=8V, VRIPPLE=1VPP | 9 | |
| Dropout Voltage | VD | 1 | 1.1 | V | IOUT=100mA | 9 | |
| Dropout Voltage | VD | 1.15 | 1.25 | V | IOUT=500mA | 9 | |
| Dropout Voltage | VD | 1.2 | 1.3 | V | IOUT=800mA | 9 | |
| DC Input Voltage | VIN | 18 | V | 4 | |||
| Junction Temperature | TJ | 150 | °C | 4 | |||
| Operating Temperature | TOPR | -20 | 125 | °C | Note 2 | 4 | |
| Storage Temperature | TSTG | -65 | 150 | °C | 4 | ||
| Input Voltage | VIN | 15 | V | 4 | |||
| Operating Junction Temperature | TJ | -20 | 125 | °C | 4 | ||
| Thermal Regulation | 0.01 | 0.1 | %/W | TA=25°C, 30ms Pulse | 9 | ||
| Junction to Ambient, SOT-223 | θJA | 165 | °C/W | 4 | |||
| Junction to Case, SOT-223 | θJC | 15 | C/W | 4 |
CAD (KiCad official)
- Symbol:
LD1117AG-50-AA3-A-R - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files:
ld1117ag-50-aa3-a-r-etched.step/ld1117ag-50-aa3-a-r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ld1117ag-50-aa3-a-r.step/ld1117ag-50-aa3-a-r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UTC Unisonic Tech datasheet (15 pp, sha256
f7f26a117cb07dc2, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).