3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownA7985ATR
STMicroelectronics · DC-DC Converters · SOIC-8
A7985ATR from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Regulator output voltage with maximum voltage range -0.3 to VCC per Table 2. |
| 2 | SYNCH | bidirectional | Master/slave synchronization signal; outputs 180° phase-shifted signal when floating, synchronizes to external clock with input range 2-3.3V high / 0-1V low per Table 4. |
| 3 | EN | input | Active-high enable control; device ON when > 1.2V, OFF when < 0.3V, with internal pull-down per Section 5.5. |
| 4 | COMP | output | Error amplifier output for compensation network; output swing 0-3.3V with 19mA source current and 30mA sink current per Table 4. |
| 5 | FB | input | Feedback input for output voltage regulation; compared to internal 0.6V reference with voltage range -0.3 to 1.5V per Table 2. |
| 6 | FSW | input | Switching frequency select input; external resistor to GND sets frequency up to 1MHz, default 250kHz when floating, typical pin voltage 1.254V per Table 4. |
| 7 | GND | power_in | Ground reference return. |
| 8 | VCC | power_in | Unregulated DC input voltage; operating range 4.5 to 38V with 4.5V turn-on threshold per Table 2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | Vcc | 45 | V | 7 | |||
| Output DC voltage | OUT | -0.3 | V | 7 | |||
| Analog pin voltage (FSW, COMP, SYNCH) | FSW, COMP, SYNCH | -0.3 | 4 | V | 7 | ||
| Enable pin voltage | EN | -0.3 | V | 7 | |||
| Feedback voltage | FB | -0.3 | 1.5 | V | 7 | ||
| Power dissipation | PTOT | 2 | W | TA < 60 °C, HSOP8 | 7 | ||
| Junction temperature range | TJ | -40 | 150 | °C | 7 | ||
| Storage temperature range | Tstg | -55 | 150 | °C | 7 | ||
| Maximum thermal resistance junction ambient | Rth(JA) | 40 | °C/W | HSOP8, package mounted on demonstration board | 7 | ||
| Operating input voltage range | VCC | 4.5 | 38 | V | 8 | ||
| Turn-on VCC threshold | VCCON | 4.5 | V | 8 | |||
| VCC UVLO hysteresis | VCCHYS | 0.1 | 0.4 | V | 8 | ||
| MOSFET on-resistance | RDS(on) | 200 | 400 | m | 8 | ||
| Maximum limiting current | ILIM | 2.5 | 3.5 | A | 8 | ||
| Switching frequency | FSW | 210 | 250 | 275 | kHz | 8 | |
| FSW pin voltage | VFSW | 1.254 | V | 8 | |||
| Duty cycle | D | 0 | 100 | % | 8 | ||
| Feedback voltage | VFB | 0.588 | 0.6 | 0.612 | V | 4.5 V < VCC < 38 V | 8 |
| Quiescent current | IQ | 2.4 | mA | Duty cycle = 0, VFB = 0.8 V | 8 | ||
| Total standby quiescent current | IQST-BY | 20 | 30 | A | 8 | ||
| EN threshold voltage (device OFF level) | VEN | 0.3 | V | Device OFF level | 8 | ||
| EN threshold voltage (device ON level) | VEN | 1.2 | V | Device ON level | 8 | ||
| EN current | IEN | 7.5 | 10 | µA | EN = VCC | 8 | |
| Soft-start duration | TSS | 7.3 | 8.2 | 9.8 | ms | FSW pin floating | 8 |
| High level output voltage (error amplifier) | VCH | 3 | V | VFB < 0.6 V | 8 | ||
| Low level output voltage (error amplifier) | VCL | 0.1 | V | VFB > 0.6 V | 8 | ||
| High input voltage (synchronization) | VS_IN,HI | 2 | 3.3 | V | 9 | ||
| Low input voltage (synchronization) | VS_IN,LO | 1 | V | 9 | |||
| Input pulse width (synchronization) | tS_IN_PW | 100 | ns | VS_IN,HI = 3 V, VS_IN,LO = 0 V | 9 | ||
| Input pulse width (synchronization) | tS_IN_PW | 300 | ns | VS_IN,HI = 2 V, VS_IN,LO = 1 V | 9 | ||
| Slave sink current | ISYNCH,LO | 0.7 | 1 | mA | VSYNCH = 2.9 V | 9 | |
| Master output amplitude | VS_OUT,HI | 2 | V | ISOURCE = 4.5 mA | 9 | ||
| Open loop voltage gain | GV | 100 | dB | 8 | |||
| Frequency adjust (adjustable switching frequency) | FADJ | 1000 | kHz | RFSW = 33 k | 8 | ||
| Soft-start duration | TSS | 2 | ms | FSW = 1 MHz, RFSW = 33 k | 8 | ||
| Error amplifier source current | IO SOURCE | 19 | mA | VFB = 0.5 V, VCOMP = 1 V | 8 | ||
| Error amplifier sink current | IO SINK | 30 | mA | VFB = 0.7 V, VCOMP = 0.75 V | 8 | ||
| Master output pulse width | tS_OUT_PW | 110 | ns | SYNCH floating | 9 | ||
| Thermal shutdown | TSHDN | 150 | °C | 9 | |||
| Thermal shutdown hysteresis | TSHDN | 30 | °C | 9 |
CAD (KiCad official)
- Symbol:
A7985ATR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
a7985atr-etched.step/a7985atr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);a7985atr.step/a7985atr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (43 pp, sha256
76615cae763f4a5c, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).