3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLTC2965HDD#PBF
Analog Devices · Power Management ICs · DFN-8-EP(3x3)
LTC2965HDD#PBF from Analog Devices, in a DFN-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Voltage monitor and supply input (3.5V to 100V operating, 3.5V to 98V monitoring range, absolute maximum 140V) connected to an internal high-value resistive divider, with OUT pulled low if VIN falls below the UVLO threshold minus hysteresis. |
| 2 | REF | power_out | Buffered reference output of 2.402V typical referenced to GND, usable as logic high for RS and PS and as the bias for the INH/INL dividers, with a maximum 1nF bypass unless a damping resistor is used. |
| 3 | INH | input | High comparator reference input whose voltage times the range setting (10x or 40x) sets the VIN rising threshold, to be kept within VCM (0.35V to 2.45V) or tied to GND to enable built-in hysteresis. |
| 4 | INL | input | Low comparator reference input whose voltage times the range setting sets the VIN falling threshold, to be kept within VCM (0.35V to 2.45V) or tied to GND to enable built-in hysteresis, with oscillation if INL > INH unless built-in hysteresis is enabled. |
| 5 | PS | input | Polarity selection input that makes OUT inverting with respect to VIN when connected to REF or a voltage above VTH (1.4V max), or noninverting when connected to GND. |
| 6 | RS | input | Range select input that selects 10x when connected to GND or 40x when connected to REF, with a threshold of 0.4V min to 1.4V max. |
| 7 | GND | power_in | Device ground. |
| 8 | OUT | output | Comparator output with a high-voltage active pull-down and a gated 500k pull-up to an internal supply of 3.5V to 5V, resistively pull-up capable to 100V (absolute maximum 140V), pulled low when the part is in UVLO. |
| 9 | EP | power_in | Exposed pad (pin 9, DD8 only) that may be left floating or connected to device ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-8-EP(3x3) |
| Category | Power Management ICs |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Input Supply Operating Range | VIN | 3.5 | 100 | V | Full operating temperature range (l) | 3 | |
| VIN Monitor Range | VMON | 3.5 | 98 | V | 3 | ||
| VIN Input Supply Current | IVIN | 3 | 7 | 15 | µA | VIN = 100V, 40x; full operating temperature range (l) | 3 |
| Undervoltage Lockout VIN Rising | VUVLO | 3 | V | VIN Rising; full operating temperature range (l) | 3 | ||
| Comparator Common Mode Voltage | VCM | 0.35 | 2.45 | V | Full operating temperature range (l) | 3 | |
| VIN Error Voltage at 96V | VERR | -1360 | 250 | 1360 | mV | INH = VREF, 40x; full operating temperature range (l) | 3 |
| VIN Error Voltage at 96V | VERR | -400 | 250 | 400 | mV | 0.35V ≤ INH ≤ 2.4V, 40x; full operating temperature range (l) | 3 |
| VIN Error Voltage at 24V | VERR | -315 | 35 | 315 | mV | INH = VREF, 10x; full operating temperature range (l) | 3 |
| VIN Error Voltage at 24V | VERR | -75 | 35 | 75 | mV | 0.35V ≤ INH ≤ 2.4V, 10x; full operating temperature range (l) | 3 |
| Comparator Offset Voltage | VOS | -3 | 1.9 | 3 | mV | INH = 0.35V, 10x; full operating temperature range (l) | 3 |
| Internal Resistive Divider Range Error | AVERR | -0.4 | 0.4 | % | INH = 2.4V, Range = 10x, 40x; full operating temperature range (l) | 3 | |
| Comparator Built-in Hysteresis | VHYS | 14 | 22 | 30 | mV | INH = GND, INL Rising, VIN = 24V; full operating temperature range (l) | 3 |
| Comparator Built-in Hysteresis | VHYS | -30 | -22 | -14 | mV | INL = GND, INH Falling, VIN = 24V; full operating temperature range (l) | 3 |
| Built-in Hysteresis Enable Threshold | VHYTH | 100 | 175 | mV | Full operating temperature range (l) | 3 | |
| VIN to OUT Comparator Propagation Delay | tPD | 40 | 80 | µs | Overdrive = 10%, OUT Falling, 10x; INH = GND, INL = 1.2V; full operating temperature range (l) | 3 | |
| Input Leakage Current (INH, INL) H-Grade | IIN(LKG) | -10 | 0.1 | 10 | nA | V = 1.2V, H-Grade; full operating temperature range (l) | 3 |
| Reference Output Voltage | VREF | 2.378 | 2.402 | 2.426 | V | IREF ≤ 100µA, VIN ≥ 3.5V; full operating temperature range (l) | 3 |
| Select Input Threshold | VTH | 0.4 | 1.4 | V | Full operating temperature range (l) | 3 | |
| Input Leakage Current | ILKG | -100 | 100 | nA | V = 2.4V; full operating temperature range (l) | 3 | |
| Voltage Output Low | VOL | 100 | mV | VIN = 1.25V, I = 10µA; full operating temperature range (l) | 3 | ||
| Voltage Output Low | VOL | 400 | mV | VIN = 3.5V, I = 500µA; full operating temperature range (l) | 3 | ||
| Voltage Output High | VOH | 2 | 2.375 | 2.75 | V | VIN = 3.5V, I = -1µA; full operating temperature range (l) | 3 |
| Voltage Output High | VOH | 2.8 | 3 | 4 | V | VIN ≥ 4.5V, I = -1µA; full operating temperature range (l) | 3 |
| Output Current High | IOH | -15 | -7.5 | -5 | µA | V = GND, VIN = 3.5V; full operating temperature range (l) | 3 |
| Leakage Current, Output High | IO(LKG) | -250 | 250 | nA | V = 100V, VIN = 6V; full operating temperature range (l) | 3 | |
| VIN Absolute Maximum Voltage | VIN | -0.3 | 140 | V | 2 | ||
| PS, RS Absolute Maximum Voltage | PS, RS | -0.3 | 6 | V | 2 | ||
| INH, INL Absolute Maximum Voltage | INH, INL | -0.3 | 6 | V | 2 | ||
| OUT Absolute Maximum Voltage | OUT | -0.3 | 140 | V | 2 | ||
| VIN Average Current | VIN | -20 | mA | Average current | 2 | ||
| OUT Average Current | OUT | -5 | 5 | mA | Average current | 2 | |
| REF Average Current | REF | -5 | 5 | mA | Average current | 2 | |
| INH, INL Average Current | INH, INL | -1 | mA | Average current | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Operating Ambient Temperature Range H-Grade | -40 | 125 | °C | LTC2965H | 2 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Thermal Resistance, Junction to Ambient (DD8 DFN) | θJA | 43 | °C/W | DD package | 2 |
CAD (KiCad official)
- Symbol:
LTC2965HDD#PBF - Footprint:
Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.5mm_EP1.66x2.38mm - 3D model: DFN-8-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
ltc2965hdd-etched.step/ltc2965hdd-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc2965hdd.step/ltc2965hdd.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (18 pp, sha256
a4223d1da4bb030d, retrieved 2026-11-19) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).