3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPCA9539DWR
Texas Instruments · I/O Expanders · SOIC-24-300mil
PCA9539DWR from Texas Instruments, in a SOIC-24-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INT | output | Interrupt output. Connect to VCC through a pullup resistor. |
| 2 | A1 | input | Address input. Connect directly to VCC or ground. |
| 3 | RESET | input | Active-low reset input. Connect to VCC through a pullup resistor if no active connection is used. |
| 4 | P00 | bidirectional | P-port input/output. Push-pull design structure. |
| 5 | P01 | bidirectional | P-port input/output. Push-pull design structure. |
| 6 | P02 | bidirectional | P-port input/output. Push-pull design structure. |
| 7 | P03 | bidirectional | P-port input/output. Push-pull design structure. |
| 8 | P04 | bidirectional | P-port input/output. Push-pull design structure. |
| 9 | P05 | bidirectional | P-port input/output. Push-pull design structure. |
| 10 | P06 | bidirectional | P-port input/output. Push-pull design structure. |
| 11 | P07 | bidirectional | P-port input/output. Push-pull design structure. |
| 12 | GND | power_in | Ground. |
| 13 | P10 | bidirectional | P-port input/output. Push-pull design structure. |
| 14 | P11 | bidirectional | P-port input/output. Push-pull design structure. |
| 15 | P12 | bidirectional | P-port input/output. Push-pull design structure. |
| 16 | P13 | bidirectional | P-port input/output. Push-pull design structure. |
| 17 | P14 | bidirectional | P-port input/output. Push-pull design structure. |
| 18 | P15 | bidirectional | P-port input/output. Push-pull design structure. |
| 19 | P16 | bidirectional | P-port input/output. Push-pull design structure. |
| 20 | P17 | bidirectional | P-port input/output. Push-pull design structure. |
| 21 | A0 | input | Address input. Connect directly to VCC or ground. |
| 22 | SCL | bidirectional | Serial clock bus. Connect to VCC through a pullup resistor. |
| 23 | SDA | bidirectional | Serial data bus. Connect to VCC through a pullup resistor. |
| 24 | VCC | power_in | Supply voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-24-300mil |
| Category | Interface |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | 6 | V | 5 | ||
| Input voltage range | VI | -0.5 | 6 | V | 5 | ||
| Output voltage range | VO | -0.5 | 6 | V | 5 | ||
| Input clamp current | IIK | -20 | mA | VI < 0 | 5 | ||
| Output clamp current | IOK | -20 | mA | VO < 0 | 5 | ||
| Input/output clamp current | IIOK | -20 | 20 | mA | VO < 0 or VO > VCC | 5 | |
| Continuous output low current | IOL | 50 | mA | VO = 0 to VCC | 5 | ||
| Continuous output high current | IOH | -50 | mA | VO = 0 to VCC | 5 | ||
| Continuous current through GND | ICC | -250 | mA | through GND | 5 | ||
| Continuous current through VCC | ICC | 160 | mA | through VCC | 5 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 5 | ||
| Supply voltage | VCC | 2.3 | V | 5 | |||
| High-level input voltage A0, A1, RESET, P07-P00, P17-P10 | VIH | 5.5 | V | 5 | |||
| Low-level input voltage A0, A1, RESET, P07-P00, P17-P10 | VIL | -0.5 | V | 5 | |||
| Low-level input voltage SCL, SDA | VIL | -0.5 | V | 5 | |||
| High-level output current P07-P00, P17-P10 | IOH | -10 | mA | 5 | |||
| Low-level output current P07-P00, P17-P00 | IOL | 25 | mA | 5 | |||
| Operating free-air temperature | TA | -40 | 85 | °C | 5 | ||
| Junction-to-ambient thermal resistance (DW SOIC) | RθJA | 46 | °C/W | DW (SOIC) 24 pins | 6 | ||
| Input diode clamp voltage | VIK | -1.2 | V | II = -18 mA, VCC 2.3 V to 5.5 V | 6 | ||
| Power-on reset voltage, VCC rising | VPORR | 1.2 | 1.5 | V | VI = VCC or GND, IO = 0, VCC 2.3 V to 5.5 V | 6 | |
| Power-on reset voltage, VCC falling | VPORF | 0.75 | 1 | V | VI = VCC or GND, IO = 0, VCC 2.3 V to 5.5 V | 6 | |
| P-port high-level output voltage | VOH | 1.8 | V | IOH = -8 mA, VCC 2.3 V | 6 | ||
| P-port high-level output voltage | VOH | 2.6 | V | IOH = -8 mA, VCC 3 V | 6 | ||
| P-port high-level output voltage | VOH | 4.1 | V | IOH = -8 mA, VCC 4.75 V | 6 | ||
| P-port high-level output voltage | VOH | 1.7 | V | IOH = -10 mA, VCC 2.3 V | 6 | ||
| P-port high-level output voltage | VOH | 2.5 | V | IOH = -10 mA, VCC 3 V | 6 | ||
| P-port high-level output voltage | VOH | 4 | V | IOH = -10 mA, VCC 4.75 V | 6 | ||
| Low-level output current SDA | IOL | 3 | mA | SDA VOL = 0.4 V, VCC 2.3 V to 5.5 V | 6 | ||
| Low-level output current P port | IOL | 8 | mA | VOL = 0.5 V | 6 | ||
| Low-level output current INT | IOL | 3 | mA | INT VOL = 0.4 V | 6 | ||
| Input current SCL, SDA | II | -1 | 1 | µA | VI = VCC or GND, 2.3 V to 5.5 V | 6 | |
| Input current A0, A1, RESET | II | -1 | 1 | µA | VI = VCC or GND, 2.3 V to 5.5 V | 6 | |
| High-level input current P port | IIH | 1 | µA | VI = VCC, 2.3 V to 5.5 V | 6 | ||
| Low-level input current P port | IIL | -1 | µA | VI = GND, 2.3 V to 5.5 V | 6 | ||
| Operating mode supply current | ICC | 100 | 200 | µA | VI = VCC or GND, IO = 0, I/O = inputs, fSCL = 400 kHz, VCC 5.5 V | 6 | |
| Operating mode supply current | ICC | 30 | 75 | µA | VI = VCC or GND, IO = 0, I/O = inputs, fSCL = 400 kHz, VCC 3.6 V | 6 | |
| Operating mode supply current | ICC | 20 | 50 | µA | VI = VCC or GND, IO = 0, I/O = inputs, fSCL = 400 kHz, VCC 2.7 V | 6 | |
| Standby mode supply current | ICC | 1.5 | 8.7 | µA | VI = GND, IO = 0, I/O = inputs, fSCL = 0 kHz, VCC 5.5 V | 6 | |
| Standby mode supply current | ICC | 0.9 | 4 | µA | VI = GND, IO = 0, I/O = inputs, fSCL = 0 kHz, VCC 3.6 V | 6 | |
| Standby mode supply current | ICC | 0.6 | 3 | µA | VI = GND, IO = 0, I/O = inputs, fSCL = 0 kHz, VCC 2.7 V | 6 | |
| Additional current in standby mode | ΔICC | 200 | µA | One input at VCC, 0.6 V, other inputs at VCC or GND, 2.3 V to 5.5 V | 6 | ||
| SCL input capacitance | Ci | 3 | 8 | pF | VI = VCC or GND, 2.3 V to 5.5 V | 6 | |
| SDA input/output capacitance | Cio | 3 | 9.5 | pF | VIO = VCC or GND, 2.3 V to 5.5 V | 6 | |
| P port input/output capacitance | Cio | 3.7 | 9.5 | pF | VIO = VCC or GND, 2.3 V to 5.5 V | 6 | |
| I2C clock frequency | fscl | 0 | 400 | kHz | 7 | ||
| I2C clock high time | tsch | 0.6 | µs | 7 | |||
| I2C clock low time | tscl | 1.3 | µs | 7 | |||
| I2C spike time | tsp | 50 | ns | 7 | |||
| I2C serial-data setup time | tsds | 100 | ns | 7 | |||
| I2C input rise time | ticr | 300 | ns | 7 | |||
| I2C bus free time between Stop and Start | tbuf | 1.3 | µs | 7 | |||
| Valid-data time SCL low to SDA output valid | tvd(data) | 50 | ns | 7 | |||
| Valid-data time of ACK condition | tvd(ack) | 0.1 | 0.9 | µs | ACK signal from SCL low to SDA (out) low | 7 | |
| Reset pulse duration | tW | 6 | ns | 7 | |||
| Time to reset | tRESET | 400 | ns | 7 | |||
| Interrupt valid time | tiv | 4 | µs | P port to INT, CL ≤ 100 pF | 7 | ||
| Output data valid | tpv | 200 | ns | SCL to P port, CL ≤ 100 pF | 7 | ||
| Input data setup time | tps | 150 | ns | P port to SCL, CL ≤ 100 pF | 7 | ||
| Input data hold time | tph | 1 | µs | P port to SCL, CL ≤ 100 pF | 7 |
CAD (KiCad official)
- Symbol:
PCA9539DWR - Footprint:
Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm - 3D model: SOIC-24-300mil (KiCad packages3D, STEP)
- 3D model files:
pca9539dwr-etched.step/pca9539dwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pca9539dwr.step/pca9539dwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (48 pp, sha256
866d4b57152bbc82, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).